Press

Reset oil service indicator Volvo XC70

Reset service light indicator Volvo XC70. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board. How do you reset service light indicator Volvo XC70, year 1997-2013.

Reset Volvo XC70 instructions

Reset Volvo XC70 2014 2015 2016 Procedure

Turn the ignition to “POSITION I”.
Press and hold “OK” button and turn the ignition to “POSITION II”.
Continue to hold for 10 seconds.
Release button when light begins to flash.
A sound will be heard when reset.
Turn the ignition off for 3 minutes.
Start engine to verify reset.

Reset Volvo XC70 2011 2012 2013 Procedure

With ignition off, press and hold trip odometer reset button (or “OK” button if equipped) and turn the ignition to “RUN” position.
Continue to hold button for 10 seconds, release when light begins to flash.
A sound will be heard and the light will turn off.
Turn the ignition off for 3 minutes then start engine to confirm the oil life reset.

Oil Change Light Reset Volvo XC70 2007 Procedure

With ignition off,
Press and hold trip odometer reset button (or “OK” button if equipped) and turn the ignition to “RUN” position.
Continue to hold button for 10 seconds, release when light begins to flash.
A sound will be heard and the light will turn off.
Turn the ignition off for 3 minutes then start engine to confirm the oil life reset.

Volvo XC70 reset service light indicator

This reset should be done after changed the engine oil and filter according to the technical specifications relating Manufacturer. Resetting without changing the engine oil lead to premature engine wear and serious problems in the functioning of these. If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure.

Reset oil service indicator Volvo C70

Reset service light indicator Volvo C70. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.How do you reset service light indicator Volvo C70, year 1997-2013.

Reset Volvo C70 instructions

Now on display you must have the trip distance measured in km / milles.
Turn the car off.
Rotate the key to position one int he ignition.
Press and hold the trip reset button.
Turn the key to position two hold the trip reset button still pressed.
After 10 seconds release the button and take the key out from the ignition.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset Volvo C70 2006 2007 2008 2009 2010 2011 2012 2013 instructions

With ignition off, press and hold the trip odometer “RESET” button and turn the ignition to the “RUN” position within 2 seconds.
Continue to hold button until original value has been reset.
When the information lamp turns on, release button within 4 seconds.
A chime will be heard.
Turn the ignition off.

Oil service reset GL – Class

2007-2012

1. Turn the ignition to position 1. (close all doors
2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer or temperature reading is shown in the multi information display.)
3. Press the TRIP reset button (center button on instrument panel) quickly 3 times. An audible beep will be heard followed by the battery voltage displayed.
4. Press the scoll forward/back button (left side of steering wheel) to highlight the “”Service menu””.”
5. Use the +/- buttons to select “”Confirmation”” menu. Press the system select button to confirm. The menu item “”Complete service”” is highlighted.”
6. Press the system selection button to confirm. “”Service confirmed”” appears.”
7. Use the scroll forward/back button to exit the menu.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset R – Class

2006-2012

1. Turn the ignition to position 1. (close all doors
2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer or temperature reading is shown in the multi information display.)
3. Press the TRIP reset button (center button on instrument panel) quickly 3 times. An audible beep will be heard followed by the battery voltage displayed.
4. Press the scoll forward/back button (left side of steering wheel) to highlight the “”Service menu””.”
5. Use the +/- buttons to select “”Confirmation”” menu. Press the system select button to confirm. The menu item “”Complete service”” is highlighted.”
6. Press the system selection button to confirm. “”Service confirmed”” appears.”
7. Use the scroll forward/back button to exit the menu.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset SLS – Class

2010-2012

1. Turn the ignition to position 1. (close all doors
2. Press the system selection button (left button on left steering wheel controls) repeatedly until the kilometer reading is shown in the multi information display.)
3. Press the system selection button (located on the far left of the steering wheel) repeatedly until the menu item “”trip”” with highlighter is stored in the multi-function display. *Trip remains selected for 5 seconds so you need to move to step 4.”
4. First press and hold the accept phone call button and within 1 second also press and hold the OK button for 5 seconds. The workshop menu will appear in the display showing “”vehicle data
5. Press the scroll forward button (lower button on left steering wheel controls) to highlight “”ASSYST PLUS”” and then confirm by pressing OK button.”
6. Press scroll forward button (lower button on left steering wheel controls) to highlight “”Full Service”” and then confirm by pressing OK button.”
7. Press scroll forward button until “”YES”” is highlighted and confirm swith OK button. “”No take-back possible”” appears.”
8. Press scroll forward button until “”Confirmation”” is highlighted and confirm with OK button. “”Full service carried out”” appears.”
9. Press OK button and back button (standalone button on left steering wheel controls) repeatedly until the menus are exited.
10. Turn the ignition off and then start the engine to verify the indicator has been reset.