1. Turn the ignition on without starting the engine.
2. Set the display window to ODO, TRIP.
3. Turn the ignition switch off.
4. Pressing the button PUSCH ODO TRIP reset switch turn the ignition switch to the ON position (keep pressing for at least 5 seconds).
5. Reset procedure is complete
1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown, turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000″ and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
1) Turn they key to the II position
2) Turn the key to the off position, and push and hold in the odometer reset button
3) Turn they key back to the II position, while still holding the button.
4) After about 10-15 seconds, the light should go off.
1. Turn the ignition switch to the “On” position without starting the engine.
2. Press the odometer reset button repeatedly until the total mileage is displayed.
3. Turn the ignition switch to “Off.”
4. Press and hold the trip odometer reset button.
5. Turn the ignition switch to “On.” Do not start the engine.
6. Release the trip odometer reset button after the service display counts down from 10 to 0 and the service light resets.
1) Ensure ignition key is turned off.
2) Press and hold the odometer reset button whilst turning the ignition switch to the on position.
3) Keep the odometer reset button pressed for 10 seconds whilst the service display counts down from 10 to 0. When the count down reaches zero the spanner icon will vanish from the display and the service indicator will be reset.