This procedure is for the Vauxhall Zafira A Service (INSP) Light Reset
With your left hand press and hold the trip reset button.
With your right hand insert key into the ignition.
Turn key to position “II” ignition lights on engine NOT started.
Keeping the trip reset button pressed you will see “INSP” and after a while “_ _ _” will be displayed.
Turn key to the “OFF” position thn release the trip reset button.
Turn key to position “II” ignition lights on engine NOT started.
That completes the service light reset for the Vauxhall Zafira A.
R P SERVICES would like to state that this process should only be used after the vehicle has been serviced.
How to reset service light on a Skoda Superb
1) key in OFF position,
2) press and hold right button on the dashboard,
3) turn key in ON position,
4) release right button
5) turn the left button on the dashboard in a right direction
Hot to reset service light on a Seat Inca
Try this.
Switch on the ignition.
Press the left hand button on the clocks and hold it in while switching off the ignition.
Release the button and you should be able to toggle between the oil, insp1 and insp2 indicators.
Choose the one you want to reset.
On the right hand side of the clocks there is two buttons.
Press and hold the bottom button with a biro and hold it until the display is reset.
Hot to reset service light on a Seat Arosa
The SEAT owners manual for the Arosa states.
With the ignition switched off, press and hold the trip meter reset button below the speedometer.
Then, switch the ignition on and hold the reset button for atleast 10 sconds.
Dashes will then appear in the display.
The service has been reset.
Reset maintenance light on Dodge Sprinter
1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51″
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!
Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)