1997-1999
Insert ignition key into centre slot located on the front of the instrument cluster. When reset, the indicator changes to green.
2000-2001
Reset the coloured indicator by inserting your key in the slot beside the indicator.
2002-2006
Turn off the engine.
Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007-2010
Turn the ignition to run (one position before starting engine).
Press the SELECT/RESET knob repeatedly until the engine oil life is displayed.
Press the SELECT/RESET knob for about 10 seconds. The information display shows the reset mode initial display.
Select the ëëOIL LIFEíí indicator by turning the SELECT/RESET knob. The display begins to blink. Push the same knob to enter this setting.
The engine oil life and the maintenance item code(s) will begin to blink. Press the SELECT/ reset knob for another 5 seconds.
The maintenance item code(s) will disappear, and the engine oil life will reset to 100. Turn the ignition off and then start the engine to verify the indicator has been reset.
Leave a Reply