2010
Start the engine/hybrid system.
Switch the display to the trip meter ěAî when the hybrid system is operating. Turn the engine/hybrid system off.
While pressing the trip meter reset button, turn the ěPOWERî switch to ON mode. (do not start the hybrid system because otherwise the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays ě000000î and the multi-information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004-2006
Turn the ignition to run (one position before starting engine).
Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
Hold down the trip meter reset knob while turning the ignition key to the run position (one position before starting engine).
Hold down the knob until the light goes off. Before the light goes off, it illuminates 3 seconds, flashes for 2 seconds and illuminates for 1 second. If the system fails to reset, the light will remain flashing. In this case, return to step 1 and try again.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007-2009
Turn the ignition to run (one position before starting engine).
Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
Hold down the trip meter reset knob while turning the ignition key to the run position (one position before starting engine).
Keep pressing the knob until the ěMAINT REQDî light goes off. If the light continues flashing, return to step 1 and try again.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2010
Turn the ignition to run – engine off (push START/STOP button once).
Press the Menu switch to change the multi-information display to blank. Turn the engine off.
While pressing the ODO/TRIP button, set the ěENGINE START STOP” switch to run – engine off (push START/STOP button once).
Keep pushing the ěODO/TRIPî switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the “RESETTING OIL MAINTENANCE DATA” message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006
Turn the ignition to run (one position before starting engine).
Push the ěODO TRIPî switch to change the display to blank. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (one position before starting engine).
Keep pushing the ěRESETî switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the “OIL MAINT RESET” message appears to inform you that light has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine).
Press the ěDISPî switch to change the multi-information display to blank. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (one position before starting engine).
Keep pushing the ěRESETî switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the “OIL MILEAGE RESET” message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the ignition to run – engine off (push START/STOP button once).
Press the ěDISPî switch to change the multi-information display to blank. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run – engine off (push START/STOP button once).
Keep pushing the ěRESETî switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the “OIL MESSAGE RESET” message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004-2006
Turn the ignition to run (one position before starting engine).
Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
Hold down the trip meter reset knob while turning the ignition key to the run position (one position before starting engine).
Hold down the button for 5 seconds or more. The odometer indicates “000000” and the light goes off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (one position before starting engine) and continue to press and hold the knob until the trip meter displays ě000000î.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays ě000000î.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Volvo 1999-2000 – S / V / C70 Models
Press and Hold odometer reset button
Turn ignition switch to “run” position
After SRL flashes, release odometer reset button
Turn ignition off
Turn ignition back on to confirm reset
Volvo 1998 – S80 Models
Turn ignition switch to position 1
Press and hold the odometer reset button
Turn ignition switch to position 2
Wait until service light blinks and then release odometer button
Volvo 1999-2000 – S80 Models
Turn ignition switch to position 1
Press and hold “day counter reset button”
Turn ignition switch to position 2
Continue holding day counter for approx. 10 seconds
After SRL flashes, release day counter button
Should hear “beep-beep” to confirm command accepted
Volvo 2001 – XC 70 Models
The following steps must be completed with no longer than 5 seconds between each step:
Make sure the trip meter is in T-1
Turn ignition key to position 1
Press and hold trip meter button until zero is shown
While still holding the trip meter, turn key to position 2
When original trip mileage returns, release the trip reset button
Turn key to off