2007-2011
1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip meter reset button
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
2012
1. Turn the ignition to run (one position before starting engine).
2. Press the MODE switch knob on the upper right side of the combination meter until “”TRIP A”” is shown and then turn the ignition off.”
3. While pressing the trip meter reset button
4. After the reset procedure is complete
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service on a Skoda Fabia Elegance combi 1.4 16v AUB 74kw 2002
Press and hold button A (the right/cel din dreapta)
Switch ignition ON Release button A
The letters ,OEL, or ,OIL, will appear in the trip recorder display
For models with digital clock turn button B to the right until ,bar, appears in the display
For models with analogue clock pull out button B until ,bar, appears in the display
How to reset service light on a Skoda Superb
1) key in OFF position,
2) press and hold right button on the dashboard,
3) turn key in ON position,
4) release right button
5) turn the left button on the dashboard in a right direction
Reset service light Skoda Octavia 2, 2004, 2005, 2006, 2007
1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.
2. Switch on the ignition and release the reset button, one of the service events appear in the display.
3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.
4. When the particular service event is displayed, turn the button for setting the digital clock to the right, service appears in the display.
5. Switch off the ignition. Only now is the service event reset.
Hot to reset service light on a Seat Inca
Try this.
Switch on the ignition.
Press the left hand button on the clocks and hold it in while switching off the ignition.
Release the button and you should be able to toggle between the oil, insp1 and insp2 indicators.
Choose the one you want to reset.
On the right hand side of the clocks there is two buttons.
Press and hold the bottom button with a biro and hold it until the display is reset.