Switch ignition OFF
Press and hold button A (underneath rev counter)
Switch ignition ON
Release button A
A spanner symbol will be displayed
Turn button A clockwise
Switch ignition OFF
Vehicles on fixed interval servicing can be reset as follows
Press and hold button “A” (positioned right of trip recorder display)
Switch ignition ON
The word “SERVICE” will appear in the trip recorder display
Release button “A”
Turn button “B” (positioned left of trip recorder display) to the right to reset the display
Switch ignition OFF
This applies to fixed service intervals only appearently
Button “A” is the trip reset
Button “B” is the clock set
Service light reset is as follows:-
1. Press and Hold the Odometer knob in
2. Turn the ignition on (do not start the car though)
3. Turn the odometer knob to the right and hold for about 5 secs.
4. Release odometer knob and switch ignition off.
5. Start car, Service indicator should now be gone.== Answer ==
cheers for the info worked first time probably saved me a few quid putting the car to a dealers.
ta much!
this worked on a 2000 modal with out a problem
To reset the service light on your vehicle is a straight forward procedure. Ignition off , Hold down the left dash button with the 000 s on . Whilst holding the button turn on the ignition and watch the display count down to 0 . Turn ignition off then on again and there you have it. Magic. Obviously this should be done in conjunction with a routine service to insure your car is safe reliable and legal .
Considering it’s made by a GM company, I would assume the standard practice here works there…
Turn key to on, but do not start…
Pump gas peddle three times…
Press and hold brake peddle till the service light blinks and then goes out…
Start the car to make sure the light was reset…
Or…
Turn to on…
Hold trip reset button…
Start car
keep holding trip reset till the light on the dash goes out…
Hopefully one of those works, but they’re just kinda the ‘try this’ until someone who knows chimes in.