Oil service reset Dodge Country, 2008, 2009, 2010.
Turn the ignition to run (one position before starting engine).
Fully depress the accelerator pedal slowly three times within 10 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Instructions
1.Sit in the driver’s seat of the XL7. Insert the ignition key and turn it to “RUN.” Do not start the engine.
2.Press and release the gas pedal three times within five seconds. Watch for the engine oil light to flash, indicating that the system is reset.
3.Turn the key to “OFF” and remove it from the ignition.
1. Turn the ignition on without starting the engine.
2. Set the display window to ODO, TRIP.
3. Turn the ignition switch off.
4. Pressing the button PUSCH ODO TRIP reset switch turn the ignition switch to the ON position (keep pressing for at least 5 seconds).
5. Reset procedure is complete
1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown, turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000″ and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition switch to the “On” position without starting the engine.
2. Press the odometer reset button repeatedly until the total mileage is displayed.
3. Turn the ignition switch to “Off.”
4. Press and hold the trip odometer reset button.
5. Turn the ignition switch to “On.” Do not start the engine.
6. Release the trip odometer reset button after the service display counts down from 10 to 0 and the service light resets.