BMW

How to reset oil change light indicator Reset Maintenance Light without using a computer for BMW

Reset oil service light BMW 7 Series

Reset oil service light BMW 7 Series. For models: BMW E32, BMW E38, BMW E65, BMW E66, BMW F01, BMW F02.

Reset oil service light BMW 7 Series model E38. From years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001.

How do you reset oil service light BMW 7 Series model E38.

Ignition key must be off.
Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
Keep the button pressed for approx 5 seconds until one of the following words appear in the display: “Oil Service” with “Reset”.
The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
Press and hold the reset button again until the word “Reset” begins to flash.
While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear: “End SIA”.
The system can only be reset again after 2.5 gal (10 liters) of fuel have been consumed.

BMW X5 2002 Oil Reset

BMW X5 Engine Oil Service reset

Turn the ignition to “0”
Press and hold odometer button and turn the ignition to “1”.
Hold odometer button pressed for approximately 5 seconds until the display shows: “Inspektion Re /
Release and press odometer button again until Reset flashes
Release and press odometer button shortly.
Release and press odometer button again.
The next oil service interval will be shown and will disappear.
Oil service lamp is now reset

Note: To abort the procedure at any time: turn the ignition to “0”.

Reset the Service Lights on a BMW 1-Series

Many models in the BMW 1-series are equipped with a maintenance system that monitors driving conditions to calculate when regular maintenance should be completed. When the computer determines it is time for regular service, a reminder light is illuminated on the control panel. After the scheduled service is performed, the service lights should be reset in order for the computer to accurately track when the next service will be due.

Instructions

1. Insert the key into the ignition.

2. Press the “Start/Stop” button. Wait for the service reminder lights to turn on and off.

3. Press and hold the trip odometer “Reset” button.

4. Release the “Reset” button when the service menu appears.

5. Press the “Menu” button on the end of the turn signal arm to move through the menu until the service reset option is highlighted.

6. Press and hold the “Reset” button until the service light resets.

BMW 525i service light reset

The good news is you can do it yourself as i explained to the car owner.

Here is how:

With the ignition off.

Press and Hold the trip meter button,

keep held in and turn ignition to position 1 this is the first click the one before the ignition lights come on

Keep the button pressed in for about 5 seconds until you see “Oil Service” or “Inspection” with “Reset” or “Re” in the display.

(On vehicles with “High” cluster, you will also see the amount of fuel in litres remaining until next service).

Quikly release and Press the button again now hold for a further 5 seconds or until “Reset” or “Re” flashes.

While this display is flashing,quickly release and press the button again to reset the Service Interval.

After the display has shown the new service interval you should see END SIA” for about 2 secs.

Please note this procedure should only be used after you car has been serviced and i would qeustion any company who is unable to reset the

service/oil light either using diagnostic equipment or using this method after they have have serviced a vehicle.

Reset computer after oil change on 2006 bmw 325xi

Turn the car on. Wait about a minute for the computer to get to normal.
press and hold the travel mile reset button. Hold it untill an ! in a triangle appears. then your maintanance info will pop up. select the item to reset. and tap the side button on the wand atached to the stearing wheel. this button is what you use to browse through your computer. press the button once it will say “reset” press and hold it the second time and it will say reset, hold for 5 seconds or so and it will show a check mark next to “reset” confirming it has reset.