Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.
Resetare calculator / computer din bordul masini auto VW Craft 2.5td 2007
Resetare calculator / computer din bordul masini auto VW Craft 2.5td 2007 , atunci cand apare eroarea de service (oil service sau inspection reset ) :
Pe bordul masini ( stai pe scaunul soferlui ) in partea stanga cum te uiti la bord sunt 2 butoane un buton M si sub acesta un buton 0 .
Puneti contactul masini ( fara a porni motorul) .
Asteptati pana pe display apare km .
Pe urma apasati butonul 0 pana apare un semnal sonor ( poate dura si 30 de secunde ).
De indata ce ati auzit semnalul sonor apsati repede butonul M pana cand pe display apar diferite erori dumneavoastra trebuie sa selectati “reset 51” , in caz ca treceti de aceasta eroare apsati butonul M pana ajunge din nou la acest mesaj pe display “reset 51” .
Cand apare pe display “reset 51” nu mai apsati butonul M , apsati butonul 0 si tinetil apasat pana pe display apre numarul 2 .
Dati drumul la butonul 0 si pe urma apsati acelasi buton de 2 ori iar pe display va aparea “reset done” (gata s-a resetat) .
Service reset VW Crafter 2.5 td
VW Crafter service reset Sitting in the drivers seat looking at the dash on the left hand side you have a M button and below it a 0 button these are the buttons you will need to use.
When i refer to the LCD this is the illuminated part in the middle that shows your mileage,service mileage and trip mileage.
Please read this fully first to get the jist of it as if you perform the actions too slow it wont work and you will have to start over.
1.Put on ignition
2.Wait for service mileage to revert to vehicle mileage
3.When it reverts to the vehicle mileage press and hold the 0 button until you hear a beep (can take up to 30 seconds)
4.As soon as you hear the beep press the M button repeatdly and you will see in the LCD display different reset’s the one you need to select is “reset 51” if you go past it just keep pressing the M button till it comes up again.
5.When the “reset 51” is displayed stop pressing the M button then press and hold the 0 button again until a number 2 is displayed in the LCD.
6.Release the 0 button and then press twice and it will say in the LCD reset done ,if it is not reset you will get a 30% power reduction after 2K miles
Service reset Sprinter 2007
Sprinter service reset Sitting in the drivers seat looking at the dash on the left hand side you have a M button and below it a 0 button these are the buttons you will need to use.
When i refer to the LCD this is the illuminated part in the middle that shows your mileage,service mileage and trip mileage.
Please read this fully first to get the jist of it as if you perform the actions too slow it wont work and you will have to start over.
1.Put on ignition
2.Wait for service mileage to revert to vehicle mileage
3.When it reverts to the vehicle mileage press and hold the 0 button until you hear a beep (can take up to 30 seconds)
4.As soon as you hear the beep press the M button repeatdly and you will see in the LCD display different reset’s the one you need to select is “reset 51” if you go past it just keep pressing the M button till it comes up again.
5.When the “reset 51” is displayed stop pressing the M button then press and hold the 0 button again until a number 2 is displayed in the LCD.
6.Release the 0 button and then press twice and it will say in the LCD reset done ,if it is not reset you will get a 30% power reduction after 2K miles
Reset Service Saab 9-3 and 9-5
Resetting your service indicator on Saab 9-3 and 9-5 models is easy:
1. Switch Ignition on
2. Press and release “CLEAR” button
3. Press “CLEAR” and hold down button for at least 8 seconds.
4. The word “SERVICE” will appear in the display after 2 bleeps.
5. Switch ignition off…….
Congratulations, you have now reset your service interval.
Reset Your Service Light Peugeot
If that spanner symbol has come up on your dashboard then it’s time your car was due a service. The symbol is just a periodic reminder, it doesn’t actually come up to denote a fault – the ‘check engine’ symbol does that.
If you service the car yourself and want to reset it or your garage has forgotten to reset it, you can do it yourself quite easily with the following simple steps:
This will work with the following models:
Peugeot 106 (1999 on)
Peugeot 206 (1998 on)
Peugeot 306 (1996 on)
Peugeot 307 (1996 on)
Peugeot 406 (1998 on)
Peugeot 607 (2000 on)
Peugeot 806 (1999 on)
Peugeot Expert (1999 on)
Peugeot 807 (2002 on)
Peugeot Partner (1999 on)
Peugeot Boxer (2002 on)
Procedure to Reset Peugeot Service Light as follows:
1. Switch the Ignition Off
2. Press and hold the tripmeter (mileage reset) button on the dash
3. Now switch the ignition to the ON position
4. Keep the button pressed for 10 seconds
5. The display will read ‘0’ and the service symbol will extinguish. Job done.