With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.
Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go. This will reset your miles to service to the factory setting and get rid of the flashing spanner!
Reset
//// go to oil substitute thuson press up arrow on wiper switch since a few seconds distance until next service appears. then it will reset back to 12000 miles hope this contribute tos modus 1.5 dci
With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.
Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go
This will reset your miles to service to the factorysetting and get rid of the flashing spanner !
Hope this helps a few people.
The service light on these vehicles is usually a spanner / wrench symbol. To reset that indicator:
Turn the Ignition ON (position 2) but do not start the engine
(On cars with keycard ignition, insert the card, then press and hold the start button for 5 seconds to turn on the dash cluster)
Press the button on the end of the wiper stalk repeatedly until the spanner symbol and miles to service appears on the display
(Some models have 2 buttons, which cycle through the options in opposite directions – either button can be used in this case)
Press and hold the button
The display will now change to the new service interval and start flashing
Keep holding the button until the display stops flashing
Release the button