With the ignition key off, press and hold the trip button
while doing this, turn the ignition key to the on position
The driver’s instrument panel screen will now read “service reset.”
Now press the silver knurled knob on the right side of the steering wheel controls, this will confirm the operation.
Tag: trip
Renault Scenic service indicator light reset
To reset the service indicator on the scenic II is as follows:
Scroll through the trip computer using the button on the end of the right hand stalk control until you get to the miles till service indicator (or the “change oil soon message” will appear if due)
Then press and hold the same button in and hold it. The miles indicator will then flash then change to 18000, keep the button pressed until the 18000 stops flashing.
NOTE: If the word “service” appears on your dash then that does NOT mean that a service is due. It is an indication that the vehicle is faulty and has a stored major fault code.
The indicator that a Service is due is when the words “change oil soon” appears or the spanner starts flashing.
Removal of spanner from peugeot 307 SW without going to garage
1. switch ignition OFF,
2. press & hold trip reset stalk (instrument cluster)
3. Switch ignition ON
4. keep pressed for 10 secs,
Display will now read 0 and ‘spanner’ symbol will go out
Service light on my Renault Megane Scenic
The procedure for the Mégane II (2002-2006, pre-facelift model) is:
Scroll through the trip computer until you get to the “change oil soon message/miles to next service” displayed.
Press and hold the mileage trip reset button on the speedo untill the display flashes, and then stays fixed. This can take a few seconds.
Reset the service indicator light on Renault Megane Scenic 2005
If you mean the spanner symbol & message such as ‘change oil soon’ just scroll through your trip computer as you do when you zero your trip mileage when you fill up with petrol.
(press top button of right hand stalk).
Scroll through trip mileage/ averages etc until you get to the change oil message and then clear it the same way you clear your trip mileage by holding the button in until the message flashes & clears.