Tag: the service

Service light reset BMW 1 Series

2008-2012

BMW recommends the use of a reset tool.

Manual Reset

1. Turn ignition to Terminal 15 which is one turn of the key or one press of the START/STOP button.
2. Press and hold the Instrument Cluster Set/Reset button for 10 seconds.
3. The upper display in the Instrument Cluster will be illuminated with a Service Item. The lower display in the Instrument Cluster will indicate the remaining time or mileage left for that Service Item. Pressing the button repeatedly will allow the display to scroll through all of the Condition Based Service Items.
4. Press and hold the Instrument Cluster Set/Reset button again and the lower display screen will indicate “”OK”” or “”DUE””.”
5. Pressing the Instrument Cluster Set/Reset button again will allow the “”RESET”” to appear in the lower window for that service. Releasing and reapplying the button one more time will reset the service displayed in the upper window only.
6. Turn the ignition off and start the engine to verify the indicator has been reset.

Reset oil service light BMW 7 Series

Reset oil service light BMW 7 Series. For models: BMW E32, BMW E38, BMW E65, BMW E66, BMW F01, BMW F02.

Reset oil service light BMW 7 Series model E38. From years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001.

How do you reset oil service light BMW 7 Series model E38.

  1. Ignition key must be off.
  2. Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
  3. Keep the button pressed for approx 5 seconds until one of the following words appear in the display: “Oil Service” with “Reset”.
  4. The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
  5. Press and hold the reset button again until the word “Reset” begins to flash.
  6. While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear: “End SIA”.
  7. The system can only be reset again after  2.5 gal (10 liters) of fuel have been consumed.

Mondeo Focus Transit Service Light Reset

Do you own a MK4 Mondeo, New Shape Transit or MK2 face lift Focus?

Do you do your own servicing or have had it serviced and still have the oil service light on?

Here are the instructions to switch off the service light:

THIS INFORMATION IS ONLY TO BE USED AFTER YOUR VEHICLE HAS BEEN SERVICED.

Turn the ignition on (engine not running but dash lights illuminated).

Turn the ignition off.

Press down both the Accelerator (Throttle) and Brake peddles.

Turn the ignition on (engine not running but dash lights illuminated).

Keep both the Accelerator (Throttle) and Brake peddles held down for between 15 and 30 seconds.

Turn off ignition.

Release peddles.

Turn the ignition on (engine not running but dash lights illuminated).

Your service light should now be out.

Vauxhall Zafira Service (INSP) Light Reset

This procedure is for the Vauxhall Zafira A Service (INSP) Light Reset

With your left hand press and hold the trip reset button.

With your right hand insert key into the ignition.

Turn key to position “II” ignition lights on engine NOT started.

Keeping the trip reset button pressed you will see “INSP” and after a while “_ _ _” will be displayed.

Turn key to the “OFF” position thn release the trip reset button.

Turn key to position “II” ignition lights on engine NOT started.

That completes the service light reset for the Vauxhall Zafira A.

R P SERVICES would like to state that this process should only be used after the vehicle has been serviced.

RESET SERVICE LIGHT SKODA OCTAVIA 2

Reset service light Skoda Octavia 2, 2004, 2005, 2006, 2007

1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.

2. Switch on the ignition and release the reset button, one of the service events appear in the display.

3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.

4. When the particular service event is displayed, turn the button for setting the digital clock to the right, service appears in the display.

5. Switch off the ignition. Only now is the service event reset.