Tag: service light reset

Reset the On-Board Computer for a 2003 Ford Fiesta

1. Pull the hood release to open the hood. Prop it up with a rod and locate the battery under the hood.

2. Find the negative battery terminal. You will see a clamp with a nut on it. Loosen the nut with an adjustable wrench and slid the clamp off of the battery terminal.

3. Wrap a towel around the negative battery clamp and keep it away from the battery altogether. The towel will help to protect you and the battery.

4. Let the vehicle sit for about 15 minutes. This will allow the computer to reset and erase all trouble codes.

5. Discard the towel and put the negative battery clamp back onto the negative battery terminal. Tighten the nut with the wrench. Tuck the rod away and lower the hood of the car.

6. Put the key into the ignition and start the engine. Verify that all service and warning lights have turned off.

Ford focus service light reset 1.6 tdci 09

This is how you do it on a MK4 Mondeo, worth a go:-

1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.

Service reset on computer display for VW Sharan V6 2003 model

Press and hold the R/H button.
Switch ignition on.
The word service will appear in the trip recorder display.
Release button.
Turn L/H button to the right to reset the display.
Switch ignition off.
Sorted!
This will not work if the vehicle is on longlife service intervals!

Reset service notification on display at vw sharan 2001

with the ignition off

press and hold the miles reset button in on dash

now turn on ignition and start engine

‘service now’ should now be displayed

now turn the clock adjuster button either left or right and this should rest the service

noification.

Turn off the service light in a renault clio

First you press the odometer button then at the same time you put the key in “on” no engine running, wait for 30 secs aprox and it will be reset, repeat this steps for the oil light
what is the odometer button