Try This
Press and hold the trip reset button.
Turn on the ignition while still holding the trip reset button you will hear the normal beeping noise.
Hold trip reset button until the service tool (little spanner) disappears and 3 dashes appear (- – -).
You can now release the button and the service interval/oil change light is reset
SERVICE INTERVAL DISPLAY
the computer has counters that not only count the miles from the speedo but also
a time count as well
Displays:
IN00 – No service is required – standard display
OEL – When 7500 miles has been reached before the yearly service is required
IN01 – Indicates time for the yearly service inc oil change
IN02 – Indicates it is time for the Major service
TO RESET THE INDIVIDUAL COUNTERS
1- turn on ignition (do not start)
2- Press the trip-reset button button on the speedo (the trip value will not reset to
zero but will reappear when the procedure is finished)
3- Turn off the ignition and thne release the trip-reset button
In the LCD display you will see the word “OEL”
Using the minute set button for the clock (lower one) you will reset the OEL interval
counter
press it – hold – release – 5 horizontal lines will appear in the display
4- press and release the trip-reset button
In the LCD display you will see “IN01” repeat step 3 to reset the inspection counter when required
5- Again press the trip-reset and rest the “IN02” counter if necessary
If doing an oil change only reset the “OEL” counter
If doing an inspection service reset both the “OEL” and “IN01” counters
If doing a full service reset all 3 – “OEL” “IN01” & “IN02”
6- Turn on ignition (do not start the car)
7- After the appearance of the “IN00” display turn off the ignition
8- You are done – the trip counter should read as it did before you started
PROGRAMMING THE INTERVALS TO REQUIREMENTS
With todays higher spec oils and/or peoples need and desire to service more regular there is a way
to alter the counters to your prefered settings (within reason)
1- Turn on ignition (don’t start the car)
2- press the trip-reset button also press the Minute set button on the clock (lower one)
3- The LCD display “OEL 1,S” where the “S” indicates SET
4- Using the trip-reset button you can call up the following counter data in sequence
OEL 1,S – Distance counter for oil change (7500 standard)
OEL 2,S – Time counter for oil change (12 months)
IN 01,S – Time counter for yearly service interval (12 months)
IN 02,S – Distance counter for full service (15000 miles)
5- Using the minute SET button on the clock (lower one) you can display the current value
repeated pressing of the button will select a subsequent lower value and at the lowest level
will reset to the highest and start to decrease again (so don’t panic)
the steps work in miles (500 at a time) and time steps in bi-monthly (1=2months) i.e.1-2-3-4-5-6
6- Once you have set the counter to the value you require – turn off the ignition
7- Job done
1985-1995
Turn the ignition to run (one position before starting engine).
Press and release the SERVICE REMINDER button until the desired item is displayed.
When the desired item is displayed, do not release SERVICE REMINDER button.
After button has been pressed for approximately 10 seconds, the service interval mileage display will begin to count down in 500 mile/km intervals.
When desired service interval mileage is reached, release button.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1996-1997
Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information Centre.
Hold the RESET button for 5 seconds. When a DIC message of RESET is displayed and the oil life index equals 100%, the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1998
Turn the ignition to run (one position before starting engine).
Press the TRIP button on the Driver Information Centre switch to view various menu choices, stop on OIL LIFE REMAINING.
Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 100%. The engine oil life monitor is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1999
Turn the ignition to run (one position before starting engine).
Press and hold the OIL RESET button in the glove box for at least 5 seconds, but no more than 60 seconds.
After 5 seconds, observe the CHANGE OIL SOON light flash 4 times before light the turns off. This indicates that the engine oil life monitor system has reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2000-2005
Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information Centre.
Press and hold the RESET button for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1985-1991
Turn the ignition to run (one position before starting engine).
Press and release the SERVICE REMINDER button until the desired item is displayed.
When the desired item is displayed, do not release SERVICE REMINDER button.
After button has been pressed for approximately 10 seconds, the service interval mileage display will begin to count down in 500 mile/km intervals.
When desired service interval mileage is reached, release button.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1998-1999
Manual Reset:
Turn key in steering lock to position 2.
Within 4 seconds press button (1) left of speedometer twice.
The present status for days or distance displays, within 10 seconds turn key in steering lock to position O.
Press and hold button (1), while turning key in steering lock to position 2 again. The present status for days or distance displays once more.
Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
2000-2001
Manual Reset:
Switch ignition on and immediately press knob to left of speedometer twice within 4 seconds.
Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds).
Release button.
Service interval displays the reset interval.
2002-2004
Switch ignition on and immediately press knob to left of speedometer twice within 1 second.
Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds).
Release button.
Service interval displays the reset interval.