Tag: right

Service oil reset Cadillac SRX

2004-2006

With Base Audio System
Turn the ignition to run (one position before starting engine).
Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
Once 100% ENGINE OIL LIFE menu is highlighted, press and hold the CLR button. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
With Navigation System
Turn the ignition to run (one position before starting engine).
Turn the system on by pressing the PWR/VOL button.
Press the INFO button located to the left of the display to access the vehicle information menu.
Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted
Press the knob once to select it.
Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2007-2009

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2010

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Cadillac CTS

2003-2006

With Base Audio System
Turn the ignition to run (one position before starting engine).
Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
Once 100% ENGINE OIL LIFE menu is highlighted, press and hold the CLR button. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition to off and start engine to verify the indicator has been reset.

With Navigation System

Turn the ignition to run (one position before starting engine).
Turn the system on by pressing the PWR/VOL button.
Press the INFO button located to the left of the display to access the vehicle information menu.
Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted
Press the knob once to select it.
Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition to off and start engine to verify the indicator has been reset.
2007-2009
Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button in the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition to off and start engine to verify the indicator has been reset.
2010
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service golf 5

The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service:

Switch ignition OFF.
Press and hold down the trip odometer reset button (at the lower right of the instrument cluster).
Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON.
The trip mileage area now displays “Service OIL”.
If trip odometer reset button is now pressed again, the display turns to “Service INSP”. Pressing the button again will cycle the display back to “Service OIL”.
When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to “Service —-“. That reminder is now reset.
The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again.
Switch ignition OFF and back ON to resume normal display.

Service interval reset Skoda Octavia

For oil press and hold the right hand button on the cluster – oil will appear in the display – release right hand button then turn left hand button clockwise until —– appears.

For insp prees and hold right hand button – turn on ignition – release button then press and release button again – insp will appear in the display – turn left hand button as before until —– appears.

note: if you’re clearing the insp service sometimes it’s neccessary to clear the oil service afterwards (if it wasn’t done at oil service)

Skoda Octavia II (2004 – ) – 07 1.8 Service Interval Display

Page 52 of the Owner’s Manual gives the answer to this:

1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.

2. Switch on the ignition and release the reset button, one of the service events appear in the display.

3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.

4. When the particular service event is displayed, turn the button for setting the digital clock to the right, “service—” appears in the display.

5. Switch off the ignition. Only now is the service event reset.