2001-2005
Turn the key to off position.
Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start the engine.
Hold the SELECT and RESET buttons until the indicator resets, hold for about 10 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).
Tag: Reset Service Indicator Guide
Service oil reset Acura Integra
1986-1990
Reset the indicator by inserting the key in the slot below the indicator.
or
Turn ignition to (II) – do not start the engine.
Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1991-1993
Reset the coloured indicator by inserting the key in the slot below the indicator.
1994-1995
Turn ignition to (II) – do not start the engine.
Press and hold the RESET button located at the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1996-2001
Turn ignition to (II) – do not start the engine.
Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Service oil reset Acura CSX
2006-2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel until you see the engine oil life display.
Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Citroen Service Light Reset for saxo, xsara
For reference of those interested in such matters, but who might not have access to an owner’s manual, this is the procedure to follow:
1) Ensure “ignition” key is turned off.
2) Depress and hold the odometer reset button whilst turning the “ignition” switch to the on position.
3) Keep the odometer reset button depressed for 10 seconds whilst the service display counts down from 10 to 0. When the count down reaches zero the spanner icon will vanish from the display and the service indicator will be reset.
Note 1: When reset, the service indicator is actually reset to 9,500 miles. The mileage that the car accumulates henceforth is subtracted from 9,500 miles, until 9,500 miles have elapsed at which point the service indicator icon will reappear inorder to warn the driver that the next service is imminent. Any mileage accumulated beyond 10,000 miles since the last reset will be indicated with a minus sign displayed infront of the mileage to indicate by how much a service is overdue.
Note 2: To the best of my knowledge, the above service light reset procedure applicable to most Peugeot cars, most Citroen cars and most Fiat cars with the exception of the Fiat Stilo. (Also applicable to car derrived vans from the above ranges).
How do you reset the “Maintenance Required” light on 2002 Accord
1) Turn they key to the II position
2) Turn the key to the off position, and push and hold in the odometer reset button
3) Turn they key back to the II position, while still holding the button.
4) After about 10-15 seconds, the light should go off.