To reset the service light on your vehicle is a straight forward procedure. Ignition off , Hold down the left dash button with the 000 s on . Whilst holding the button turn on the ignition and watch the display count down to 0 . Turn ignition off then on again and there you have it. Magic. Obviously this should be done in conjunction with a routine service to insure your car is safe reliable and legal .
Tag: Reset Maintenance Light
Service Light Reset Vauxhall Opel Signum/Vectra
Is there a way to reset the service light on a 55 plate Vauxhall Signum 1.9 cdti design without going to a VX Dealer
· Turn Ignition Off
· Hold Trip Reset In
· Turn Ignition On
· Still Holding Trip Reset wait for three dashes
· Turn off Ignition
Turn on Ignition to confirm
Reset service light toyota yaris
I second that, as I was shown how to do it. Follow it, VEry simple instructions.
Have your key in the ignition, but off. Well make sure its at trip A before you start this.
Next, press the button, but leave it pressed….
Now put the car into the “on” position….
The indicator will show a bar like it was counting down, wait till that finishes and it all starts to show 0000miles or whatever it is. And let go.
Your done.
How to Reset the “MAINT REQD” Light on Toyota Sienna
1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.
Ford focus service light reset 1.6 tdci 09
This is how you do it on a MK4 Mondeo, worth a go:-
1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.