Tag: position

Reset the SLK 230 for an Oil Change

The Mercedes-Benz SLK 230 features an engine oil-life tracking system as part of the car’s computer. The computer monitors driving habits and engine conditions to determine when the oil needs to be changed. The control panel displays a reminder when the car needs an oil change. In order for the computer system to work correctly to predict the next oil change, reset the light following an oil service.

1. Insert the key in the ignition. Turn the key to position “2.”

2. Press the adjust button twice within one second. The adjust button is located below the speedometer.

3. Turn the ignition off.

4. Press and hold the adjust button. Turn the ignition to position “2.”

5.Release the adjust button after a signal sounds and the service indicator resets visibly.

Citroen Xsara Picasso Service Light Reset

How to Reset the Service Light Citroen Xsara Picasso

Recently I have had a few requests for Citroen Xsara Picasso Service Light Reset information from people who service their own vehicles.

Being a mobile mechanic and auto diagnostic specialist I could use the stock answer and say “I’ll have to plug it in for you”.

As you have no doubt seen through my other posts I do not believe in making things difficult for the home mechanic.
Here is the procedure:

Sit in drivers seat ignition off and handbrake applied.

Press and hold trip reset button.

Turn key to position two (ignition lights on engine not started).

Keeping the trip reset button pressed in you will notice your trip meter counting down.

When zero (0) is reached start the car and the service light (spanner symbol) should now be extinguished.

Please only use this information after your vehicle has been serviced

Reset oil service Skoda 2000

Skoda 2000

Longlife service intervals require diagnostic tool. Fixed intervals: Press and hold button below the speedometer. Turn ignition to the “ON” position.
“SERVICE” is displayed. Release button. Turn button below the tachometer to the right until display is reset. Turn ignition off.

Reset oil service Toyota

Toyota 4Runner 2003-onwards

With the ignition “OFF”, press and hold “RESET” button. Turn ignition to the “ON” position. Continue to hold button until “MAINT REQD” light turns off.
Turn ignition off.

Camry 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Corolla

Turn the key to the off position. Press and hold down the trip meter button and turn the key to the “on” position. Continue to hold the trip button for 5 seconds after the key is turned on, then release.

Highlander 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Matrix 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Prius 2004-onwards
With the “POWER” switch off, press and hold “ODO TRIP” button. Press “POWER” switch twice selecting “IG-ON”. Continue to hold button until”000000″ is displayed and “MAINT REQD” light turns off. Turn “POWER” switch to off.

RAV4 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Sequoia 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Sienna 2004-onwards
With the ignition “OFF”, press and hold button to the right of the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″
is displayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Solara 2004-onwards
With the ignition “OFF”, press and hold button to the left of the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Tacoma 2005-onwards
With the ignition “OFF”, press and hold button to the right of the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″
is displayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Tundra 2003-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Reset the ’07 Porche 911 Carrera Oil Change

Instructions

1. Push inward on the trip odometer reset button and turn the key to the auxiliary position (forward one click from the off position) until “Oil Service Re” or “Oil Service Reset” appears on the odometer screen.

2. Press the odometer reset button a second time until the work “Reset” or “Re” appears on the screen. The word will continuously flash.

3. Press the odometer reset button quickly to complete the reset. “End SIA” appears to indicate a successful reset of the system.