Oil service reset Dodge Country, 2008, 2009, 2010.
Turn the ignition to run (one position before starting engine).
Fully depress the accelerator pedal slowly three times within 10 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
u can change the oil after every 5000 miles
BMW X5 Engine Oil Service reset
Turn the ignition to “0”
Press and hold odometer button and turn the ignition to “1”.
Hold odometer button pressed for approximately 5 seconds until the display shows: “Inspektion Re /
Release and press odometer button again until Reset flashes
Release and press odometer button shortly.
Release and press odometer button again.
The next oil service interval will be shown and will disappear.
Oil service lamp is now reset
Note: To abort the procedure at any time: turn the ignition to “0”.
The Mercedes-Benz SLK 230 features an engine oil-life tracking system as part of the car’s computer. The computer monitors driving habits and engine conditions to determine when the oil needs to be changed. The control panel displays a reminder when the car needs an oil change. In order for the computer system to work correctly to predict the next oil change, reset the light following an oil service.
1. Insert the key in the ignition. Turn the key to position “2.”
2. Press the adjust button twice within one second. The adjust button is located below the speedometer.
3. Turn the ignition off.
4. Press and hold the adjust button. Turn the ignition to position “2.”
5.Release the adjust button after a signal sounds and the service indicator resets visibly.
The good news is you can do it yourself as i explained to the car owner.
Here is how:
With the ignition off.
Press and Hold the trip meter button,
keep held in and turn ignition to position 1 this is the first click the one before the ignition lights come on
Keep the button pressed in for about 5 seconds until you see “Oil Service” or “Inspection” with “Reset” or “Re” in the display.
(On vehicles with “High” cluster, you will also see the amount of fuel in litres remaining until next service).
Quikly release and Press the button again now hold for a further 5 seconds or until “Reset” or “Re” flashes.
While this display is flashing,quickly release and press the button again to reset the Service Interval.
After the display has shown the new service interval you should see END SIA” for about 2 secs.
Please note this procedure should only be used after you car has been serviced and i would qeustion any company who is unable to reset the
service/oil light either using diagnostic equipment or using this method after they have have serviced a vehicle.