Renault Scenic service indicator light reset

To reset the service indicator on the scenic II is as follows:
Scroll through the trip computer using the button on the end of the right hand stalk control until you get to the miles till service indicator (or the “change oil soon message” will appear if due)
Then press and hold the same button in and hold it. The miles indicator will then flash then change to 18000, keep the button pressed until the 18000 stops flashing.

NOTE: If the word “service” appears on your dash then that does NOT mean that a service is due. It is an indication that the vehicle is faulty and has a stored major fault code.

The indicator that a Service is due is when the words “change oil soon” appears or the spanner starts flashing.

Service Light Reset – Renault Safrane

The reset button is located on the bottom right hand side of the Rev counter on the instrument cluster.

Switch ignition on.

Press reset button until “spanner “ symbol flashes.

Keep button depressed until “spanner” symbol stops flashing and remains illuminated.

Indicator shows appropriate service interval.

Release reset button.

Switch ignition off.

Some vehicles are fitted with a ‘SERV’ lamp – this is not a service interval indicator lamp, it is a malfunction indicator lamp (MIL).

Service Light Reset – Renault Laguna

The reset button is located under the speedometer on the instrument cluster.

Switch ignition on.

Press reset button until “spanner” symbol flashes.

Keep button depressed until “spanner” symbol stops flashing and remains illuminated.

Indicator shows appropriate service interval.

Release reset button.

Switch ignition off.

Some vehicles are fitted with a ‘SERV’ lamp – this is not a service interval indicator lamp, it is a malfunction indicator lamp (MIL)

Reset the service indicator light on Renault Megane Scenic 2005

If you mean the spanner symbol & message such as ‘change oil soon’ just scroll through your trip computer as you do when you zero your trip mileage when you fill up with petrol.
(press top button of right hand stalk).
Scroll through trip mileage/ averages etc until you get to the change oil message and then clear it the same way you clear your trip mileage by holding the button in until the message flashes & clears.

Reset the oil maintenance indicator on a Lexus IS350

1. Start the car and set the odometer to the total vehicle miles setting
2. Turn off the car
3. Hold in the odometer button
4. Turn the car on by pressing ‘start’ twice but DO NOT start the car (don’t press the break peddle)
5. Continue to hold the odometer button in until it resets to all zeros
6. Let it go