Tag: oil maintenance warning

Reset oil service golf 5

The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service:

Switch ignition OFF.
Press and hold down the trip odometer reset button (at the lower right of the instrument cluster).
Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON.
The trip mileage area now displays “Service OIL”.
If trip odometer reset button is now pressed again, the display turns to “Service INSP”. Pressing the button again will cycle the display back to “Service OIL”.
When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to “Service —-“. That reminder is now reset.
The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again.
Switch ignition OFF and back ON to resume normal display.

Chevrolet Cobalt 2004-2010 Oil Service Light Reset

2005-2010

Turn the ignition to run (one position before starting engine).
Press the INFORMATION and RESET buttons on the DIC at the same time to enter the personalization menu.
Press the INFORMATION button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light 2000 seat ibiza

Vehicles on fixed interval servicing can be reset as follows
Press and hold button “A” (positioned right of trip recorder display)
Switch ignition ON
The word “SERVICE” will appear in the trip recorder display
Release button “A”
Turn button “B” (positioned left of trip recorder display) to the right to reset the display
Switch ignition OFF

This applies to fixed service intervals only appearently

Button “A” is the trip reset
Button “B” is the clock set

Resetare calculator / computer din bordul masini auto VW Craft 2.5td 2007

Resetare calculator / computer din bordul masini auto VW Craft 2.5td 2007 , atunci cand apare eroarea de service (oil service sau inspection reset ) :

Pe bordul masini ( stai pe scaunul soferlui ) in partea stanga cum te uiti la bord sunt 2 butoane un buton M si sub acesta un buton 0 .

Puneti contactul masini ( fara a porni motorul) .
Asteptati pana pe display apare km .
Pe urma apasati butonul 0 pana apare un semnal sonor ( poate dura si 30 de secunde ).
De indata ce ati auzit semnalul sonor apsati repede butonul M pana cand pe display apar diferite erori dumneavoastra trebuie sa selectati “reset 51” , in caz ca treceti de aceasta eroare apsati butonul M pana ajunge din nou la acest mesaj pe display “reset 51” .
Cand apare pe display “reset 51” nu mai apsati butonul M , apsati butonul 0 si tinetil apasat pana pe display apre numarul 2 .
Dati drumul la butonul 0 si pe urma apsati acelasi buton de 2 ori iar pe display va aparea “reset done” (gata s-a resetat) .

service light reset Audi A3 (1996-1999), A4 (1994-2001), A6 (1996-2000)

If the service is due on these vehicles, when the key is turned to position 2, one of the dashboard displays will show “Service INSP”, “INSP1” or “INSP2” for Fixed interval services, and “SERVICE OEL / OIL” for the Oil Service interval.
The oil service reset procedure is as follows:
Start with the ignition turned OFF
Press and hold the button on the right side of the display while turning the ignition on (position 2)
“Service OEL / OIL” should be displayed
Release the button on the right
Pull out the button on the left side of the display until the service prompt is cleared
The display should now read —
Release the button on the left

…then to access and reset the service information:

Push the button on the right briefly
“Service INSP” should show on the dash
Pull out the button on the left side of the display until the service prompt is cleared
The display should now read —
Release the button on the left
Turn off the ignition