Tag: mileage

How to reset service light on 1997 to 2005 Renault Clio 2 – 1.2

Engine should be off, hold down both buttons at the end off stork.

Switch on still holding buttons down then switch off then press buttons ten times. The new mileage will show.

If it’s just the spanner flashing on the dashboard then it’s easy to reset.

Scroll through display using button on end of wiper stalk until you get to the remaining mileage.

Press and hold button until display flashes to new service mileage.

Keep button held until the spanner stops flashing and let go of button.

Turn ignition off and on to check, bingo!!

You can reset the SERV/MIL light by disconnecting battery negative for 20 seconds but you need to recode your radio, and if fault is still active it will come back on again

Renault Laguna 2 service light reset

With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.

Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go. This will reset your miles to service to the factory setting and get rid of the flashing spanner!

Service light on my Renault Megane Scenic

The procedure for the Mégane II (2002-2006, pre-facelift model) is:

Scroll through the trip computer until you get to the “change oil soon message/miles to next service” displayed.
Press and hold the mileage trip reset button on the speedo untill the display flashes, and then stays fixed. This can take a few seconds.

Renault Laguna 2 service light reset

With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.

Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go

This will reset your miles to service to the factorysetting and get rid of the flashing spanner !

Hope this helps a few people.

Reset the service indicator light on Renault Megane Scenic 2005

If you mean the spanner symbol & message such as ‘change oil soon’ just scroll through your trip computer as you do when you zero your trip mileage when you fill up with petrol.
(press top button of right hand stalk).
Scroll through trip mileage/ averages etc until you get to the change oil message and then clear it the same way you clear your trip mileage by holding the button in until the message flashes & clears.