Tag: light

How to Turn Off the Service Light on a CLK 320

Most models of the Mercedes-Benz CLK 320 are equipped with a service reminder system that displays a notification light on the control panel when service is due. The onboard computer tracks driving conditions to determine when to illuminate the service reminder light. The service technician at the Mercedes-Benz dealer or garage will reset the service light for you when he performs regular maintenance on the car. If you do your own maintenance, you can turn the light off yourself.

1. Turn the ignition switch on. Do not start the engine.

2. Press the information menu button on the left of the steering wheel repeatedly until the total mileage is displayed.

3. Press the up- or down-arrow button on the left of the steering wheel until the service light is displayed.

4. Press and hold the reset button until a confirmation message appears on the display. The reset button is located to the left of the odometer.

5. Press and release the reset button to confirm the reset. The service light turns off.

Toyota Tacoma reset service light

1. To reset MAINT reminder light after engine oil replacement, turn ignition switch to OFF position with odometer showing ODOMETER READING. Turn ignition switch to ON position while holding down trip meter RESET button.

2. Hold trip meter RESET button down for at least 5 seconds until odometer indicates “000000” and MAINT reminder light goes out.

How to Reset the Service Light on the Volvo S70

Put the key into the ignition and turn it to position “I.”
Press the trip odometer button in and hold it. Turn the ignition key to position “II.”
Wait about 5 seconds until the service engine light begins to blink. After the 4th blink, turn the ignition key back to position “I.”
Release the button and start the engine. The light should have turned off. If not, repeat steps 1 through 4 again.

service light reset Renault Trafic (2001-present), Vauxhall Movano (2007- present), Vivaro (2007-present)

Turn the Ignition ON (position 2) but do not start the engine
Within 100 seconds of turning the key, press the accelerator pedal to the floor and hold it down
While still holding down the accelerator, press and release the brake pedal twice, then press it a 3rd time and hold it down
Release both pedals
Within around 10 seconds, the Oil Service warning light should turn off
Immediately Turn Ignition OFF, then within 3 seconds turn it back ON (position 2)
Turn Ignition back OFF to complete

resetare ulei ford transit / service light reset ford transit

-cu contactul luat
-tineti apasat pedala de frana si cea de acceleratie in acelasi timp
-dupa aproximativ 30 secunde becul de la ulei palpaie eliberati pedalele
-resetare reusita

ENGLISH:

-turn contact off.
-press brake and accelerator at the same time
-hold for 30 secs, when the service lamp starts blinking, release pedals and the light goes off
…until your next oil change is due.