Is there a way to reset the service light on a 55 plate Vauxhall Signum 1.9 cdti design without going to a VX Dealer
· Turn Ignition Off
· Hold Trip Reset In
· Turn Ignition On
· Still Holding Trip Reset wait for three dashes
· Turn off Ignition
Turn on Ignition to confirm
I second that, as I was shown how to do it. Follow it, VEry simple instructions.
Have your key in the ignition, but off. Well make sure its at trip A before you start this.
Next, press the button, but leave it pressed….
Now put the car into the “on” position….
The indicator will show a bar like it was counting down, wait till that finishes and it all starts to show 0000miles or whatever it is. And let go.
Your done.
1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.
This is how you do it on a MK4 Mondeo, worth a go:-
1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.
First you press the odometer button then at the same time you put the key in “on” no engine running, wait for 30 secs aprox and it will be reset, repeat this steps for the oil light
what is the odometer button