Reset service light toyota yaris

I second that, as I was shown how to do it. Follow it, VEry simple instructions.

Have your key in the ignition, but off. Well make sure its at trip A before you start this.

Next, press the button, but leave it pressed….
Now put the car into the “on” position….
The indicator will show a bar like it was counting down, wait till that finishes and it all starts to show 0000miles or whatever it is. And let go.

Your done.

Reset Service Saab 9-3 and 9-5

Resetting your service indicator on Saab 9-3 and 9-5 models is easy:

1. Switch Ignition on

2. Press and release “CLEAR” button

3. Press “CLEAR” and hold down button for at least 8 seconds.

4. The word “SERVICE” will appear in the display after 2 bleeps.

5. Switch ignition off…….

Congratulations, you have now reset your service interval.

service light reset Vauxhall – Most passenger cars 1999 onwards

Start with key in but Ignition OFF
Press and hold Trip Reset button on the dash
(on some models you may also need to depress the brake pedal)
Turn Ignition ON
Keep holding Trip Reset (and brake pedal) until the service indicator shows the appropriate interval
Release Trip Reset (and brake pedal)
Turn Ignition OFF
Turn Ignition back ON to confirm

reset service skoda 1,6

Vehicles on longlife service intervals must have the service interval indicator reset using suitable diagnostic equipment.

Vehicles on fixed interval servicing can be reset as follows:
Press and hold button A.
Switch ignition ON.
The word “SERVICE” will appear in the trip recorder display.
Release button ffi.
Turn button B to the right to reset the display.
Switch ignition OFF

vito service light 108 cdi 2002

Turn the key to position 2in the steering lock and immediately press the KM button twice briefly.
Within 10 seconds, turn the key back to position 0 in the steering lock.

Press and hold down the KM button. Turn the key to position 2 in the steering lock. Hold the KM button down for a further 10 seconds.

The service indicator with current remaining distance/remaining time appears.

After about 10 seconds, an acoustic signal will sound and the service displaywith the new remaining distance/remaining time will appear for about 10 seconds.

Relaese the KM button.

All quoted direct from the handbook! It took me a couple of goes to get it to reset (lack of counting ability maybe!) but I got it reset in the end.