service light reset Audi A4

Audi A4 (2001-2007)

For Fixed Interval servicing, you can use the following procedure:

Below and to the right of the speedometer are three buttons – the right-hand button of these three is usually labelled “0,0”, and the centre button labelled with a spanner/wrench symbol.
Start with the key in, but the ignition turned OFF
Press and hold the Spanner button, while turning the ignition on (position 2)
Release the Spanner button
“SERVICE” should now appear on the display
Press and hold the 0,0 button until the display shows “SERVICE IN xxxx Miles / Kilometres”
Release the 0,0 button, then turn off the ignition

service light reset Audi A8

Audi A8 (1994-2004)

Towards the bottom-right corner of the instrument cluster there should be a button labelled “0,0”
Start with the key in, but the ignition turned OFF
Press and hold the 0,0 button, while turning the ignition on (position 2)
Release the 0,0 button
“SERVICE” should now appear on the display
Press and hold the 0,0 button until the display shows “SERVICE IN xxxx Miles / Kilometres”
Release the 0,0 button, then turn off the ignition

service light reset Audi TT

For Fixed Interval servicing, you can use the following procedure:
Start with the key in, but the ignition turned OFF
Press and hold the button on the right of the display, while turning the ignition one click (to position 1)
Release the button on the right
“SERVICE” should now appear on the display
Press and hold the button on the left of the display until it shows “SERVICE IN xxxx Miles / Kilometres”
Release the left button, then turn off the ignition

service light reset Volkswagen (with digital Odomoter)

The code on the mileage display when you start the car will read “IN01”, “IN02” or similar. To remove this, use the following procedure (this should work on any VW with a digital odometer):

With the key out of the ignition find and press the odometer reset button (hold down)
Turn the ignition on (warning lights come on) wait about 10-15 sec until most or the lights are off (still pressing odometer reset button)
Turn ignition off (button still pressed) and remove the key
Release reset button
Interval should now be reset. If this is not the case, repeat the above procedure

service light reset Ford Galaxy

With the ignition off, press the reset button under the mileage counter
Hold in reset button whilst turning the ignition on
After about 4 or 5 seconds (up to 30 seconds in some cases) the display should reset itself
Release the button and turn the ignition off
It may be necessary to repeat this process