1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.
Tag: ignition
Reset the On-Board Computer for a 2003 Ford Fiesta
1. Pull the hood release to open the hood. Prop it up with a rod and locate the battery under the hood.
2. Find the negative battery terminal. You will see a clamp with a nut on it. Loosen the nut with an adjustable wrench and slid the clamp off of the battery terminal.
3. Wrap a towel around the negative battery clamp and keep it away from the battery altogether. The towel will help to protect you and the battery.
4. Let the vehicle sit for about 15 minutes. This will allow the computer to reset and erase all trouble codes.
5. Discard the towel and put the negative battery clamp back onto the negative battery terminal. Tighten the nut with the wrench. Tuck the rod away and lower the hood of the car.
6. Put the key into the ignition and start the engine. Verify that all service and warning lights have turned off.
Ford focus service light reset 1.6 tdci 09
This is how you do it on a MK4 Mondeo, worth a go:-
1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.
Service reset on computer display for VW Sharan V6 2003 model
Press and hold the R/H button.
Switch ignition on.
The word service will appear in the trip recorder display.
Release button.
Turn L/H button to the right to reset the display.
Switch ignition off.
Sorted!
This will not work if the vehicle is on longlife service intervals!
Reset service notification on display at vw sharan 2001
with the ignition off
press and hold the miles reset button in on dash
now turn on ignition and start engine
‘service now’ should now be displayed
now turn the clock adjuster button either left or right and this should rest the service
noification.