Turn the ignition to run (push START/STOP button once).
Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
In the setting mode screen press (circle) button to move to MAINTENANCE.
Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button The reset mode will open up and allow you to enter the desired distance.
Select RESET and select new time or distance.
Repeat step 3 for ENGINE OIL FILTER. Turn the ignition off and then start the engine to verify the indicator has been reset.
Tag: ignition
How do you How do you reset the service reminder indicator light on a 2007 range rover sport?
turn off the car’s ignition.
Hold down the reset button on the dash board to zero the mileage.
keep it held in.
turn the car’s ignition on – but do not start.
keep the button in for 5 seconds.
a menu will come up – like date/mileage.
let go and then press the button again.
it will toggle through some options – then get to ‘rst’
press the button again, and your done
Service light reset on Volkswagen inc GOLF etc
There’s no great ”trade secret” as to how to reset the service indicator lamp on most VW’s, simply refer to pages in the Owner’s Handbook!
For reference of those interested in such matters, but who might not have access to an owner’s manual, this is the procedure to follow:
Note: the Service Reminder Indicator displays 3 messages: OEL, IN 01, and IN 02. These display to alert the driver to follow the items listed under the manufacturer’s service interval.
To reset the message displays, turn the ignition switch on. Press and hold the odometer reset button “A” located below the speedometer. Turn off the ignition while holding the button. “OEL” will display on the indicator. Press and hold the lower digital clock reset button “B” until five dashes appear in the display. If needed, press the odometer reset button until “IN 01” appears and then press the clock reset button until five dashes appear. If needed, press the odometer reset button until “IN 02” is displayed and then press the clock reset button until five dashes appear.
To exit reset mode, turn the ignition switch on and when “IN 01” appears, turn the ignition switch off.
On sum golfs you have to turn the milage odometer
To the best of my knowledge, the above service light reset procedure applicable to most Volkswagens
Service interval reset Skoda Octavia
For oil press and hold the right hand button on the cluster – oil will appear in the display – release right hand button then turn left hand button clockwise until —– appears.
For insp prees and hold right hand button – turn on ignition – release button then press and release button again – insp will appear in the display – turn left hand button as before until —– appears.
note: if you’re clearing the insp service sometimes it’s neccessary to clear the oil service afterwards (if it wasn’t done at oil service)
Skoda Octavia II (2004 – ) – 07 1.8 Service Interval Display
Page 52 of the Owner’s Manual gives the answer to this:
1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.
2. Switch on the ignition and release the reset button, one of the service events appear in the display.
3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.
4. When the particular service event is displayed, turn the button for setting the digital clock to the right, “service—” appears in the display.
5. Switch off the ignition. Only now is the service event reset.