Oil service reset Chevrolet GMC Trucks Avalanche

2002-2006

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the Change Oil Soon light flashes the system is resetting.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2007-2010

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC (i) button. If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display.
Press and hold the SET/RESET (check mark) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

or

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
Display the OIL LIFE REMAINING on the DIC to verify it is at 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Chevrolet Camaro

1999-2002
Turn the ignition to run (one position before starting engine).
Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2010
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Chevrolet Aveo

2009-2010

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Cadillac Fleetwood

1991-1992

Turn the ignition to run (one position before starting engine).
Press RANGE and FUEL USED simultaneously to display oil life index.
Press RANGE and RESET simultaneously until the CHANGE OIL SOON light flashes (hold about 5 seconds).
The oil life index will not remain displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1993

Turn the ignition to run (one position before starting engine).
Reset the Engine Oil Life Index by pressing the RANGE and RESET keys on the Fuel Data Centre for 5 to 60 seconds.
Release the keys. The indicator will automatically reset to 100. The CHANGE OIL SOON light will flash 4 times to indicate it has been reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1994-1996

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, repeat steps).
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Cadillac Escalade

2002-2006

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, repeat steps).
Turn the ignition off and then start the engine to verify the indicator has been reset.

2007-2010

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.