Tag: display

Reset the Service B in a Mercedes C230

When a service is needed based on the car’s mileage or time since the last service, the display screen on a Mercedes C230 will notify you. The display screen is located within the speedometer on the instrument panel. Mercedes mechanics will reset the Service B notification light after the service is performed. If you performed the service, you need to reset the light yourself. Service B includes an oil and filter change, a tire rotation and other maintenance checks.

Instructions

1. Insert the key into the ignition and turn it until the battery comes or the engine turns on.

2. Locate the left and right arrow buttons on the left side of your steering wheel. Press either button until the mileage is displayed on the instrument panel display screen.

3. Press the up or down button until the service symbol appears on the screen.

4. Locate the trip odometer reset button to the left of the instrument panel. Hold the reset button for a few seconds until the screen displays the message, “Do you want to reset the service interval? Confirm with the R-button.” Release the button once the phrase appears.

5. Press the reset button to reset the Service B notification.

BMW 525i service light reset

The good news is you can do it yourself as i explained to the car owner.

Here is how:

With the ignition off.

Press and Hold the trip meter button,

keep held in and turn ignition to position 1 this is the first click the one before the ignition lights come on

Keep the button pressed in for about 5 seconds until you see “Oil Service” or “Inspection” with “Reset” or “Re” in the display.

(On vehicles with “High” cluster, you will also see the amount of fuel in litres remaining until next service).

Quikly release and Press the button again now hold for a further 5 seconds or until “Reset” or “Re” flashes.

While this display is flashing,quickly release and press the button again to reset the Service Interval.

After the display has shown the new service interval you should see END SIA” for about 2 secs.

Please note this procedure should only be used after you car has been serviced and i would qeustion any company who is unable to reset the

service/oil light either using diagnostic equipment or using this method after they have have serviced a vehicle.

Service light reset Toyota Cressida, Supra

1986-88

When “CHECK ENGINE OIL” is displayed on the Super Monitor, press the “SELECT” button below the display until “ENGINE OIL” mode is displayed (unless it already is displayed). Then press and hold the “SET” button until “OK” is displayed.

Reset oil service Skoda 2000

Skoda 2000

Longlife service intervals require diagnostic tool. Fixed intervals: Press and hold button below the speedometer. Turn ignition to the “ON” position.
“SERVICE” is displayed. Release button. Turn button below the tachometer to the right until display is reset. Turn ignition off.

Oil service reset Tornado

1986-1988

Turn the ignition to run (one position before starting engine).
The oil life index may be reset by pressing and holding the ENGINE DATA and GAGE buttons until Oil Index 100 message appears in the information display panel.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1989

Turn the ignition to run (one position before starting engine).
Press ENG DATA until oil life index is displayed.
Press ENG DATA and GAGE simultaneously until oil life index resets to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1990

Turn the ignition to run (one position before starting engine).
Press ENG DATA until oil life index is displayed.
Press RESET/ENTER until oil life index resets to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1991-1992

Without Visual Information Centre:
Turn the ignition to run (one position before starting engine).
Press OPTIONS until oil life index is displayed.
Press RESET/ENTER until oil life index resets to 100 (hold about 5 seconds).
Turn the ignition off and then start the engine to verify the indicator has been reset.
With Visual Information Centre:
Turn the ignition to run (one position before starting engine).
Press INFO key then OIL LIFE key to display oil life index.
Press RESET key until oil life index resets to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.