Tag: display

Reset service light Skoda Octavia 1.9 TDi

Page 52 of the Owner’s Manual gives the answer to this:

1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.

2. Switch on the ignition and release the reset button, one of the service events appear in the display.

3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.

4. When the particular service event is displayed, turn the button for setting the digital clock to the right, “service—” appears in the display.

5. Switch off the ignition. Only now is the service event reset.

Reset service light 2000 seat ibiza

Vehicles on fixed interval servicing can be reset as follows
Press and hold button “A” (positioned right of trip recorder display)
Switch ignition ON
The word “SERVICE” will appear in the trip recorder display
Release button “A”
Turn button “B” (positioned left of trip recorder display) to the right to reset the display
Switch ignition OFF

This applies to fixed service intervals only appearently

Button “A” is the trip reset
Button “B” is the clock set

Reset service indicator citroen piccaso

To reset the service light on your vehicle is a straight forward procedure. Ignition off , Hold down the left dash button with the 000 s on . Whilst holding the button turn on the ignition and watch the display count down to 0 . Turn ignition off then on again and there you have it. Magic. Obviously this should be done in conjunction with a routine service to insure your car is safe reliable and legal .

Service reset on computer display for VW Sharan V6 2003 model

Press and hold the R/H button.
Switch ignition on.
The word service will appear in the trip recorder display.
Release button.
Turn L/H button to the right to reset the display.
Switch ignition off.
Sorted!
This will not work if the vehicle is on longlife service intervals!

Reset service notification on display at vw sharan 2001

with the ignition off

press and hold the miles reset button in on dash

now turn on ignition and start engine

‘service now’ should now be displayed

now turn the clock adjuster button either left or right and this should rest the service

noification.