Tag: dash

Reset service light Renault Twingo 2007

The service light on these vehicles is usually a spanner / wrench symbol. To reset that indicator:

Turn the Ignition ON (position 2) but do not start the engine

(On cars with keycard ignition, insert the card, then press and hold the start button for 5 seconds to turn on the dash cluster)

Press the button on the end of the wiper stalk repeatedly until the spanner symbol and miles to service appears on the display

(Some models have 2 buttons, which cycle through the options in opposite directions – either button can be used in this case)

Press and hold the button

The display will now change to the new service interval and start flashing

Keep holding the button until the display stops flashing

Release the button

Renault Laguna 2 service light reset

With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.

Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go. This will reset your miles to service to the factory setting and get rid of the flashing spanner!

Renault Laguna 2 service light reset

With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.

Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go

This will reset your miles to service to the factorysetting and get rid of the flashing spanner !

Hope this helps a few people.

Oil service reset Jeep Cherokee SRT8

On my ’08 I just had the oil change indicator come on, and I successfully reset it. The point is that the message took a few seconds after turning the key on to appear in the dash. You need to wait until the message appears, then you have 10 seconds to do the 3 pedal depresses. It doesn’t work if you start depressing the pedal immediately after turning the key on, if you don’t wait for the oil change message to appear.

Service oil reset Acura Integra

1986-1990

Reset the indicator by inserting the key in the slot below the indicator.
or
Turn ignition to (II) – do not start the engine.
Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1991-1993

Reset the coloured indicator by inserting the key in the slot below the indicator.

1994-1995

Turn ignition to (II) – do not start the engine.
Press and hold the RESET button located at the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1996-2001

Turn ignition to (II) – do not start the engine.
Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.