2008-2010
Turn the ignition on without starting the engine (press START/STOP) button.
Locate TRIP computer switches on the right side of the instrument panel (Square and Circle buttons).
Press Square (button) repeatedly to bring up the “Setting” screen on the instrument panel display.
Follow the prompts to select the “Maintenance” menu. Once this menu is accessed follow the prompts to set or reset the “Engine Oil”.
Repeat and follow prompts to reset “Oil Filter”.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Tag: computer
Reset the On-Board Computer for a 2003 Ford Fiesta
1. Pull the hood release to open the hood. Prop it up with a rod and locate the battery under the hood.
2. Find the negative battery terminal. You will see a clamp with a nut on it. Loosen the nut with an adjustable wrench and slid the clamp off of the battery terminal.
3. Wrap a towel around the negative battery clamp and keep it away from the battery altogether. The towel will help to protect you and the battery.
4. Let the vehicle sit for about 15 minutes. This will allow the computer to reset and erase all trouble codes.
5. Discard the towel and put the negative battery clamp back onto the negative battery terminal. Tighten the nut with the wrench. Tuck the rod away and lower the hood of the car.
6. Put the key into the ignition and start the engine. Verify that all service and warning lights have turned off.
Service reset on computer display for VW Sharan V6 2003 model
Press and hold the R/H button.
Switch ignition on.
The word service will appear in the trip recorder display.
Release button.
Turn L/H button to the right to reset the display.
Switch ignition off.
Sorted!
This will not work if the vehicle is on longlife service intervals!
How to Turn Off the Service Light on a CLK 320
Most models of the Mercedes-Benz CLK 320 are equipped with a service reminder system that displays a notification light on the control panel when service is due. The onboard computer tracks driving conditions to determine when to illuminate the service reminder light. The service technician at the Mercedes-Benz dealer or garage will reset the service light for you when he performs regular maintenance on the car. If you do your own maintenance, you can turn the light off yourself.
1. Turn the ignition switch on. Do not start the engine.
2. Press the information menu button on the left of the steering wheel repeatedly until the total mileage is displayed.
3. Press the up- or down-arrow button on the left of the steering wheel until the service light is displayed.
4. Press and hold the reset button until a confirmation message appears on the display. The reset button is located to the left of the odometer.
5. Press and release the reset button to confirm the reset. The service light turns off.
Resetare calculator / computer din bordul masini auto VW Craft 2.5td 2007
Resetare calculator / computer din bordul masini auto VW Craft 2.5td 2007 , atunci cand apare eroarea de service (oil service sau inspection reset ) :
Pe bordul masini ( stai pe scaunul soferlui ) in partea stanga cum te uiti la bord sunt 2 butoane un buton M si sub acesta un buton 0 .
Puneti contactul masini ( fara a porni motorul) .
Asteptati pana pe display apare km .
Pe urma apasati butonul 0 pana apare un semnal sonor ( poate dura si 30 de secunde ).
De indata ce ati auzit semnalul sonor apsati repede butonul M pana cand pe display apar diferite erori dumneavoastra trebuie sa selectati “reset 51” , in caz ca treceti de aceasta eroare apsati butonul M pana ajunge din nou la acest mesaj pe display “reset 51” .
Cand apare pe display “reset 51” nu mai apsati butonul M , apsati butonul 0 si tinetil apasat pana pe display apre numarul 2 .
Dati drumul la butonul 0 si pe urma apsati acelasi buton de 2 ori iar pe display va aparea “reset done” (gata s-a resetat) .