1982-1990
Insert ignition key into slot below indicator flag at lower right corner of instrument cluster.
Push key in until reminder window changes from red to green.
1997-2000
With Reset Button on Instrument Panel:
Turn off the engine.
Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
With Key Slot on Instrument Panel:
Reset the coloured indicator by inserting your key in the slot beside the indicator.
2001-2005
Turn off the engine.
Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to run (one position before starting engine).
Press the SELECT/RESET knob until the engine oil life indicator is displayed.
Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
Press the SELECT/RESET knob for more than 5 seconds. The maintenance items codes(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Tag: code
Service oil reset Honda Accord
1982-1985
After completing the oil change, the maintenance lamp may be reset by inserting the ignition key into the appropriate slot on the instrument panel below the indicator lamp. The indicator will change to green.
1986-1991
Insert ignition key into slot below indicator flag at lower right corner of instrument cluster.
Push key in until indicator changes from red to green.
1992-1996
Insert ignition key into centre slot located on the front of the instrument cluster. When reset, the indicator changes to green.
1997-1999
With Reset Button on Instrument Panel:
Turn the ignition off.
Press the select switch and reset switch at the same time, turn the ignition switch to run (one position before starting).
Hold them for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
With Key Slot on Instrument Panel:
Reset the indicator by inserting the key in the slot and changing the indicator to green.
2000-2005
Turn off the engine.
Press and hold the SELECT/RESET button in the instrument panel. and turn the ignition switch ON (ii).
Hold the button for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to run (one position before starting engine).
Press the SELECT/RESET knob until the engine oil life indicator is displayed.
Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Service oil reset Acura ZDX
2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).
Service oil reset Acura TSX
2004-2005
Press and hold the TRIP/RESET button and turn ignition to (II) – do not start the engine.
Continue to hold the TRIP/RESET button for 10 seconds until light resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Service oil reset Acura RL
2005
Turn ignition to (II) – do not start engine.
Press the SELECT/RESET button until the oil life displays.
Press and hold the SELECT/RESET button for 10 seconds, until MAINTENANCE RESET displays.
Press the SELECT/RESET button to select OK to reset the display.
Select RESET on the display and press the SELECT/RESET button.
Turn ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).