Tag: change

Service oil reset Chevrolet Camaro

1999-2002
Turn the ignition to run (one position before starting engine).
Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2010
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Chevrolet Aveo

2009-2010

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Cadillac Escalade

2002-2006

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, repeat steps).
Turn the ignition off and then start the engine to verify the indicator has been reset.

2007-2010

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Ford focus service light reset 1.6 tdci 09

This is how you do it on a MK4 Mondeo, worth a go:-

1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.

resetare ulei ford transit / service light reset ford transit

-cu contactul luat
-tineti apasat pedala de frana si cea de acceleratie in acelasi timp
-dupa aproximativ 30 secunde becul de la ulei palpaie eliberati pedalele
-resetare reusita

ENGLISH:

-turn contact off.
-press brake and accelerator at the same time
-hold for 30 secs, when the service lamp starts blinking, release pedals and the light goes off
…until your next oil change is due.