2004-2007
Turn the ignition to run (one position before starting engine).
Press and release the trip/reset button until the OIL LIFE message is displayed.
Then press and hold the trip/reset button until a chime sounds 5 times, and RESET is displayed in the message centre. When the system is reset, the odometer will again be displayed in the message centre.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine).
With the CHANGE OIL SOON message displayed, press either of the DIC buttons to clear the CHANGE OIL SOON message.
Display OIL LIFE RESET on the DIC using (square button).
Press and hold the ENTER (arrow button) button for at least 1 second. An ACKNOWLEDGED display message will appear for 3 seconds or until the next button is pressed. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2009
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the message is not displayed, the system is reset. If the CHANGE OIL SOON message comes back on when you start the vehicle, the engine oil life system has not reset. Repeat the procedure.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004-2005
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to run (one position before starting engine).
With the CHANGE OIL SOON message displayed, press any of the 3 DIC buttons to clear the CHANGE OIL SOON message.
Display OIL LIFE RESET on the DIC.
Press and hold the ENTER button for at least 1 second. An ACKNOWLEDGED display message will appear for 3 seconds or until the next button is pressed. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1985-1991
Turn the ignition to run (one position before starting engine).
Press and release the SERVICE REMINDER button until the desired item is displayed.
When the desired item is displayed, do not release SERVICE REMINDER button.
After button has been pressed for approximately 10 seconds, the service interval mileage display will begin to count down in 500 mile/km intervals.
When desired service interval mileage is reached, release button.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004-2008
Turn the ignition to run (one position before starting engine).
Within one second press the knob/button twice.
The present status for days or distance is displayed. Within 10 seconds turn the key to OFF/LOCK.
Press and hold the knob/button, while turning the distance is displayed once more. Continue to hold the knob/button. After 10 seconds, a signal sounds and the display shows 7,000 mi or 11000km for 10 seconds.
Release the knob/button.
Turn the ignition off and then start the engine to verify the indicator has been reset.