Instructions
1.Sit in the driver’s seat of the XL7. Insert the ignition key and turn it to “RUN.” Do not start the engine.
2.Press and release the gas pedal three times within five seconds. Watch for the engine oil light to flash, indicating that the system is reset.
3.Turn the key to “OFF” and remove it from the ignition.
This Maintenance light is a reminder : “TIME FOR AN OIL CHANGE!”
1. Turn the ignition key to the ‘OFF’ position with the trip meter A reading shown.
2. Turn the ignition key to the ‘ON’ position while holding down the trip meter ‘RESET’ button.
3. Hold down the knob for at least 5 seconds. The odometer indicates ‘000000’ and the light goes off.
How can you reset service light, maintance on Toyota Avensis
1. Set the multi-information display to TRIP A.
2. Turn the ignition switch off.
3. Press and hold the ODO / TRIP switch, and turn the ignition switch on (IG).
4. After turning the ignition switch on (IG), keep holding the switch for at least 5 seconds.
1. Turn the ignition on without starting the engine.
2. Set the display window to ODO, TRIP.
3. Turn the ignition switch off.
4. Pressing the button PUSCH ODO TRIP reset switch turn the ignition switch to the ON position (keep pressing for at least 5 seconds).
5. Reset procedure is complete
1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown, turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates “000000″ and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.