Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

the service

service light reset Audi A3 (1996-1999), A4 (1994-2001), A6 (1996-2000)

If the service is due on these vehicles, when the key is turned to position 2, one of the dashboard displays will show “Service INSP”, “INSP1” or “INSP2” for Fixed interval services, and “SERVICE OEL / OIL” for the Oil Service interval.
The oil service reset procedure is as follows:
Start with the ignition turned OFF
Press and hold the button on the right side of the display while turning the ignition on (position 2)
“Service OEL / OIL” should be displayed
Release the button on the right
Pull out the button on the left side of the display until the service prompt is cleared
The display should now read —
Release the button on the left

…then to access and reset the service information:

Push the button on the right briefly
“Service INSP” should show on the dash
Pull out the button on the left side of the display until the service prompt is cleared
The display should now read —
Release the button on the left
Turn off the ignition

service light reset Vauxhall – Most passenger cars 1999 onwards

Start with key in but Ignition OFF
Press and hold Trip Reset button on the dash
(on some models you may also need to depress the brake pedal)
Turn Ignition ON
Keep holding Trip Reset (and brake pedal) until the service indicator shows the appropriate interval
Release Trip Reset (and brake pedal)
Turn Ignition OFF
Turn Ignition back ON to confirm

resetare ulei ford transit / service light reset ford transit

-cu contactul luat
-tineti apasat pedala de frana si cea de acceleratie in acelasi timp
-dupa aproximativ 30 secunde becul de la ulei palpaie eliberati pedalele
-resetare reusita

ENGLISH:

-turn contact off.
-press brake and accelerator at the same time
-hold for 30 secs, when the service lamp starts blinking, release pedals and the light goes off
…until your next oil change is due.

reset service skoda 1,6

Vehicles on longlife service intervals must have the service interval indicator reset using suitable diagnostic equipment.

Vehicles on fixed interval servicing can be reset as follows:
Press and hold button A.
Switch ignition ON.
The word “SERVICE” will appear in the trip recorder display.
Release button ffi.
Turn button B to the right to reset the display.
Switch ignition OFF

vito service light 108 cdi 2002

Turn the key to position 2in the steering lock and immediately press the KM button twice briefly.
Within 10 seconds, turn the key back to position 0 in the steering lock.

Press and hold down the KM button. Turn the key to position 2 in the steering lock. Hold the KM button down for a further 10 seconds.

The service indicator with current remaining distance/remaining time appears.

After about 10 seconds, an acoustic signal will sound and the service displaywith the new remaining distance/remaining time will appear for about 10 seconds.

Relaese the KM button.

All quoted direct from the handbook! It took me a couple of goes to get it to reset (lack of counting ability maybe!) but I got it reset in the end.

Categories





Copyright © 2013. All Rights Reserved.