Engine should be off, hold down both buttons at the end off stork.
Switch on still holding buttons down then switch off then press buttons ten times. The new mileage will show.
If it’s just the spanner flashing on the dashboard then it’s easy to reset.
Scroll through display using button on end of wiper stalk until you get to the remaining mileage.
Press and hold button until display flashes to new service mileage.
Keep button held until the spanner stops flashing and let go of button.
Turn ignition off and on to check, bingo!!
You can reset the SERV/MIL light by disconnecting battery negative for 20 seconds but you need to recode your radio, and if fault is still active it will come back on again
If you mean the spanner symbol & message such as ‘change oil soon’ just scroll through your trip computer as you do when you zero your trip mileage when you fill up with petrol.
(press top button of right hand stalk).
Scroll through trip mileage/ averages etc until you get to the change oil message and then clear it the same way you clear your trip mileage by holding the button in until the message flashes & clears.
2007-2009
Turn the ignition to run (one position before starting engine).
Press the information and reset buttons on the DIC at the same time to enter the personalization menu.
Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL-LIFE RESET.
Press and hold the reset button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to run (one position before starting engine).
Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007-2010
Turn the ignition to run (one position before starting engine).
Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.