Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

reset your own service light

Service Light Reset SCION xD

2007-2011

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip meter reset button
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2012

1. Turn the ignition to run (one position before starting engine).
2. Press the MODE switch knob on the upper right side of the combination meter until “”TRIP A”” is shown and then turn the ignition off.”
3. While pressing the trip meter reset button
4. After the reset procedure is complete
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service Light Reset SCION xB

2004-2011

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip meter reset button
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2012

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip button for 5 seconds
4. The reset is complete when the MAINT REQ light turn off and the odometer indicates 0 and then returns to its regular display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service Light Reset SCION tC 2012

2005-2012

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip meter reset button
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service SCION iQ 2012

2012

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
“3. While pressing the trip meter reset button
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service light Jaguar XF

Reset oil service light Jaguar XF. How to reset maintenance light, reset service light indicator. Can be made manually by use button on car dash board.

How do you reset oil service light Jaguar XF.

  1. Press and hold rear fog lamp switch Ignition on, do not start engine.
  2. Release rear fog lamp switch.
  3. Press and hold trip button (end of left side stalk).
  4. Press and hold rear fog lamp switch See resetting service light message in message center.
  5. The rear fog light switch is just below the trunk release on the lower left side of the steering wheel.
  6. The message center is between the speedo and tach ,bar, not the touch screen.

 

Categories





Copyright © 2013. All Rights Reserved.