1997-1999
Reset the coloured indicator by inserting the key in the slot below the indicator.
or
Turn the key to off position.
Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start the engine.
Hold the SELECT and RESET buttons until the indicator resets, 10 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2000
Reset the coloured indicator by inserting the key in the slot below the indicator.
2001-2005
Turn the key to off position.
Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start the engine.
Hold the SELECT and RESET buttons until the indicator resets, hold for about 10 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel until you see the engine oil life display.
Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1997-1998
Reset the coloured indicator by inserting the key in the slot below the indicator
1999-2003
Turn the key to off position.
Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start the engine.
Hold the SELECT and RESET buttons until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
turn off the car’s ignition.
Hold down the reset button on the dash board to zero the mileage.
keep it held in.
turn the car’s ignition on – but do not start.
keep the button in for 5 seconds.
a menu will come up – like date/mileage.
let go and then press the button again.
it will toggle through some options – then get to ‘rst’
press the button again, and your done
For reference of those interested in such matters, but who might not have access to an owner’s manual, this is the procedure to follow:
1) Ensure “ignition” key is turned off.
2) Depress and hold the odometer reset button whilst turning the “ignition” switch to the on position.
3) Keep the odometer reset button depressed for 10 seconds whilst the service display counts down from 10 to 0. When the count down reaches zero the spanner icon will vanish from the display and the service indicator will be reset.
Note 1: When reset, the service indicator is actually reset to 9,500 miles. The mileage that the car accumulates henceforth is subtracted from 9,500 miles, until 9,500 miles have elapsed at which point the service indicator icon will reappear inorder to warn the driver that the next service is imminent. Any mileage accumulated beyond 10,000 miles since the last reset will be indicated with a minus sign displayed infront of the mileage to indicate by how much a service is overdue.
Note 2: To the best of my knowledge, the above service light reset procedure applicable to most Peugeot cars, most Citroen cars and most Fiat cars with the exception of the Fiat Stilo. (Also applicable to car derrived vans from the above ranges).