2004-2005
Turn the ignition to run (one position before starting engine).
Ensure ODO/TRIP display screen is in the odometer mode. Turn ignition off.
While pressing ODO/TRIP button, turn ignition to run (one position before starting engine).
Continue to hold button for over 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2007
Turn the ignition to run (one position before starting engine).
Ensure odometer reading is shown. Turn ignition off.
While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the ignition to run (one position before starting engine).
Ensure odometer reading is shown. Turn ignition off.
Vehicles with smart key system:
3.While pressing the trip meter reset button, press the “ENGINE START STOP” switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays “000000”.
Vehicles without smart key system:
3.While pressing the trip meter reset button, turn the ignition to run (one position before starting engine). Continue to press and hold the button until the trip meter displays “000000”.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2010
Turn the ignition to run (one position before starting engine) and bring up the odometer reading. Turn the ignition off.
While holding down the “RESET” button turn the ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds. If the system fails to reset, the light will continue flashing.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004
Turn the ignition to run (one position before starting engine).
Press ODO/TRIP button to display odometer mode. Turn ignition off.
While pressing ODO/TRIP button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2005-2006
Turn the ignition to run (one position before starting engine).
Push the “TRIP” button to change the trip meter display to blank. Turn the ignition off.
While pressing the trip meter “RESET” button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
“Mileage Reset” appears on the display, the master warning light comes on, and a warning tone sounds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine). Use the trip meter switch to bring up the trip meter A reading.Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (one position before starting engine) and continue to press and hold the knob until the multi information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the engine on. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2010
Start the engine/hybrid system.
Switch the display to the trip meter ěAî when the hybrid system is operating. Turn the engine/hybrid system off.
While pressing the trip meter reset button, turn the ěPOWERî switch to ON mode. (do not start the hybrid system because otherwise the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays ě000000î and the multi-information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.