2005-2006
Turn the ignition to run (one position before starting engine).
Bring up the odometer reading using the ODO/TRIP knob then the turn ignition off.
Hold down ODO/TRIP knob while turning the ignition key to the run position (one position before starting engine).
Hold down the knob until the light goes off. Before the light goes off, it illuminates
3 seconds, flashes for 2 seconds and illuminates for 1 second. If the system fails to reset, the light will remain flashing. In this case, return to step 1 and try again.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine).
Bring up the odometer reading using the ODO/TRIP knob then the turn ignition off.
Hold down ODO/TRIP knob while turning the ignition key to the run position (one position before starting engine) for longer than 7 seconds. While doing this operation, the “engine oil replacement” reminder light goes off. If the system fails to reset, the light will remain flashing. In this case, return to step 1 and try again.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the engine on by holding the START/STOP switch. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004
Turn the ignition to run (one position before starting engine).
Press ODO/TRIP button to display odometer mode. Turn ignition off.
While pressing ODO/TRIP button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2005-2006
Turn the ignition to run (one position before starting engine).
Push the “TRIP” button to change the trip meter display to blank. Turn the ignition off.
While pressing the trip meter “RESET” button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
“Mileage Reset” appears on the display, the master warning light comes on, and a warning tone sounds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine). Use the trip meter switch to bring up the trip meter A reading.Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (one position before starting engine) and continue to press and hold the knob until the multi information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the engine on. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2000-2005
Turn off the engine.
Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006
Turn off the engine.
Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
Hold the button for at least 10 seconds, until the indicator resets.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2010
Turn the ignition to run (one position before starting engine).
If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly until it is.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an switch. ON Mode is equivalent of ignition (II).
2010
Turn the ignition to (II) – do not start the engine.
Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
Select RESET by pressing the INFO (▲/▼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).