2009-2010
Turn the ignition to run (one position before starting engine).
Press and release the SELECT/RESET stem to display “OIL LIFE XXX% HOLD RESET = NEW”.
Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2007
Turn the ignition to run (one position before starting engine).
Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the ignition to run (one position before starting engine).
Press SETUP to display OIL LIFE %.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1999-2001
Turn the ignition to run (one position before starting engine).
press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2002-2003
Turn the ignition to run (one position before starting engine).
Press the SETUP control to access the System Check function.
Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”.
Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”.
Press and hold the RESET control to display “OIL LIFE SET TO 100%”. Your oil life is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004-2005
Turn the ignition to run (one position before starting engine).
Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
Press RESET control to reset oil change.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007-2009
Turn the ignition to run (one position before starting engine).
Press and release the RESET stem to display “OIL LIFE = XXX% HOLD RESET = NEW”.
Press and hold the RESET stem for 2 seconds and release. Oil life is set to XX% and “OIL LIFE SET TO XX%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2010
Turn the ignition to run (one position before starting engine).
Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”.
Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2009-2010
Turn the ignition to run (one position before starting engine).
Press and release the SELECT/RESET stem to display “OIL LIFE = XXX% HOLD RESET = NEW”.
Press and hold the SELECT/RESET stem for 2 seconds and release. Oil life is set to XX% and “OIL LIFE SET TO XX%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2005-2009
Turn the ignition to run (one position before starting engine).
Use the fuel button on the Driver Information Center to reach the ENGINE OIL LIFE screen.
Press and hold the select button on the DIC for 5 seconds while ENGINE OIL LIFE is displayed.
OIL LIFE RESET will appear on the DIC display for 10 seconds to let you know the system is reset. If the change oil light comes back on when you start your vehicle, the engine oil life system has not reset, repeat the procedure.
Turn the ignition off and then start the engine to verify the indicator has been reset.