key

Reset oil service indicator Volvo C70

Reset service light indicator Volvo C70. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.How do you reset service light indicator Volvo C70, year 1997-2013.

Reset Volvo C70 instructions

Now on display you must have the trip distance measured in km / milles.
Turn the car off.
Rotate the key to position one int he ignition.
Press and hold the trip reset button.
Turn the key to position two hold the trip reset button still pressed.
After 10 seconds release the button and take the key out from the ignition.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset Volvo C70 2006 2007 2008 2009 2010 2011 2012 2013 instructions

With ignition off, press and hold the trip odometer “RESET” button and turn the ignition to the “RUN” position within 2 seconds.
Continue to hold button until original value has been reset.
When the information lamp turns on, release button within 4 seconds.
A chime will be heard.
Turn the ignition off.

Reset oil service light BMW 7 Series

Reset oil service light BMW 7 Series. For models: BMW E32, BMW E38, BMW E65, BMW E66, BMW F01, BMW F02.

Reset oil service light BMW 7 Series model E38. From years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001.

How do you reset oil service light BMW 7 Series model E38.

Ignition key must be off.
Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
Keep the button pressed for approx 5 seconds until one of the following words appear in the display: “Oil Service” with “Reset”.
The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
Press and hold the reset button again until the word “Reset” begins to flash.
While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval the following will appear: “End SIA”.
The system can only be reset again after 2.5 gal (10 liters) of fuel have been consumed.

Vauxhall Zafira Service (INSP) Light Reset

This procedure is for the Vauxhall Zafira A Service (INSP) Light Reset

With your left hand press and hold the trip reset button.

With your right hand insert key into the ignition.

Turn key to position “II” ignition lights on engine NOT started.

Keeping the trip reset button pressed you will see “INSP” and after a while “_ _ _” will be displayed.

Turn key to the “OFF” position thn release the trip reset button.

Turn key to position “II” ignition lights on engine NOT started.

That completes the service light reset for the Vauxhall Zafira A.

R P SERVICES would like to state that this process should only be used after the vehicle has been serviced.

RESET SERVICE LIGHT SKODA SUPERB

How to reset service light on a Skoda Superb

1) key in OFF position,

2) press and hold right button on the dashboard,

3) turn key in ON position,

4) release right button

5) turn the left button on the dashboard in a right direction

RESET MAINTENANCE LIGHT ON DODGE SPRINTER

Reset maintenance light on Dodge Sprinter

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51″
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!

Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)