2000
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. The reset is complete when the CHANGE OIL SOON indicator flashes 2 times.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2001-2004
Turn the ignition to run (one position before starting engine).
Repeatedly push the TRIP/RESET button until OIL is displayed on the Driver Information Centre.
Push and hold the RESET button for 5 seconds. The number will disappear and be replaced by 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1985-1995
Turn the ignition to run (one position before starting engine).
Press and release the SERVICE REMINDER button until the desired item is displayed.
When the desired item is displayed, do not release SERVICE REMINDER button.
After button has been pressed for approximately 10 seconds, the service interval mileage display will begin to count down in 500 mile/km intervals.
When desired service interval mileage is reached, release button.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1996-1997
Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information Centre.
Hold the RESET button for 5 seconds. When a DIC message of RESET is displayed and the oil life index equals 100%, the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1998
Turn the ignition to run (one position before starting engine).
Press the TRIP button on the Driver Information Centre switch to view various menu choices, stop on OIL LIFE REMAINING.
Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 100%. The engine oil life monitor is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1999
Turn the ignition to run (one position before starting engine).
Press and hold the OIL RESET button in the glove box for at least 5 seconds, but no more than 60 seconds.
After 5 seconds, observe the CHANGE OIL SOON light flash 4 times before light the turns off. This indicates that the engine oil life monitor system has reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2000-2005
Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information Centre.
Press and hold the RESET button for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2004-2006
With Base Audio System
Turn the ignition to run (one position before starting engine).
Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
Once 100% ENGINE OIL LIFE menu is highlighted, press and hold the CLR button. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
With Navigation System
Turn the ignition to run (one position before starting engine).
Turn the system on by pressing the PWR/VOL button.
Press the INFO button located to the left of the display to access the vehicle information menu.
Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted
Press the knob once to select it.
Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007-2009
Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2010
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2003-2006
With Base Audio System
Turn the ignition to run (one position before starting engine).
Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
Once 100% ENGINE OIL LIFE menu is highlighted, press and hold the CLR button. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition to off and start engine to verify the indicator has been reset.
With Navigation System
Turn the ignition to run (one position before starting engine).
Turn the system on by pressing the PWR/VOL button.
Press the INFO button located to the left of the display to access the vehicle information menu.
Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted
Press the knob once to select it.
Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition to off and start engine to verify the indicator has been reset.
2007-2009
Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button in the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition to off and start engine to verify the indicator has been reset.
2010
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.