Hot to reset service light on a Seat Inca
Try this.
Switch on the ignition.
Press the left hand button on the clocks and hold it in while switching off the ignition.
Release the button and you should be able to toggle between the oil, insp1 and insp2 indicators.
Choose the one you want to reset.
On the right hand side of the clocks there is two buttons.
Press and hold the bottom button with a biro and hold it until the display is reset.
Think you press the trip bottom on the dash, whilst turning the ignition on, and hold it down for 10 seconds.
1986-1990
Reset the indicator by inserting the key in the slot below the indicator.
or
Turn ignition to (II) – do not start the engine.
Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1991-1993
Reset the coloured indicator by inserting the key in the slot below the indicator.
1994-1995
Turn ignition to (II) – do not start the engine.
Press and hold the RESET button located at the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.
1996-2001
Turn ignition to (II) – do not start the engine.
Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Audi A8 (1994-2004)
Towards the bottom-right corner of the instrument cluster there should be a button labelled “0,0”
Start with the key in, but the ignition turned OFF
Press and hold the 0,0 button, while turning the ignition on (position 2)
Release the 0,0 button
“SERVICE” should now appear on the display
Press and hold the 0,0 button until the display shows “SERVICE IN xxxx Miles / Kilometres”
Release the 0,0 button, then turn off the ignition