with the ignition off
press and hold the miles reset button in on dash
now turn on ignition and start engine
‘service now’ should now be displayed
now turn the clock adjuster button either left or right and this should rest the service
noification.
Category: Volkswagen
How to reset oil change light indicator reset maintenance light without using a computer for Volkswagen
Polo MK4 Service Light Reset
Depending on your car/engine, it works it out as 10000miles or 12months, whichever comes first I think.
On a MkIV Golf you reset it like this:
1. Push and hold the odometer button.
2. Turn on ignition.
3. Turn digital clock button clockwise, and choose the service you want to reset.
4. Turn off ignition.
Your Service indicator should now have been reset.
I would imagine the above is the same on a Polo. If not, hopefully someone will come along to help!
Reset Service Light on a Polo 96-99
Polo 96-99
IN01 -inspection service
Switch ignition ON
Press and hold button (A left) under speedo
Switch ignition OFF
Release button
Press and release button A (left)
The letter “IN01” will appear in the odometer display of the speedometer.
Press clock minute button B until “—–” appears in the display
Press button A (left) to display “OEL”
Press button B to display “—–”
Switch ignition on until the letters “IN00” appear in the display
I have instructions for Oil service (OEL) and IN02 inspection service if this doesn’t work.
Resetare calculator / computer din bordul masini auto VW Craft 2.5td 2007
Resetare calculator / computer din bordul masini auto VW Craft 2.5td 2007 , atunci cand apare eroarea de service (oil service sau inspection reset ) :
Pe bordul masini ( stai pe scaunul soferlui ) in partea stanga cum te uiti la bord sunt 2 butoane un buton M si sub acesta un buton 0 .
Puneti contactul masini ( fara a porni motorul) .
Asteptati pana pe display apare km .
Pe urma apasati butonul 0 pana apare un semnal sonor ( poate dura si 30 de secunde ).
De indata ce ati auzit semnalul sonor apsati repede butonul M pana cand pe display apar diferite erori dumneavoastra trebuie sa selectati “reset 51” , in caz ca treceti de aceasta eroare apsati butonul M pana ajunge din nou la acest mesaj pe display “reset 51” .
Cand apare pe display “reset 51” nu mai apsati butonul M , apsati butonul 0 si tinetil apasat pana pe display apre numarul 2 .
Dati drumul la butonul 0 si pe urma apsati acelasi buton de 2 ori iar pe display va aparea “reset done” (gata s-a resetat) .
Service reset VW Crafter 2.5 td
VW Crafter service reset Sitting in the drivers seat looking at the dash on the left hand side you have a M button and below it a 0 button these are the buttons you will need to use.
When i refer to the LCD this is the illuminated part in the middle that shows your mileage,service mileage and trip mileage.
Please read this fully first to get the jist of it as if you perform the actions too slow it wont work and you will have to start over.
1.Put on ignition
2.Wait for service mileage to revert to vehicle mileage
3.When it reverts to the vehicle mileage press and hold the 0 button until you hear a beep (can take up to 30 seconds)
4.As soon as you hear the beep press the M button repeatdly and you will see in the LCD display different reset’s the one you need to select is “reset 51” if you go past it just keep pressing the M button till it comes up again.
5.When the “reset 51” is displayed stop pressing the M button then press and hold the 0 button again until a number 2 is displayed in the LCD.
6.Release the 0 button and then press twice and it will say in the LCD reset done ,if it is not reset you will get a 30% power reduction after 2K miles