Reset oil service light Jaguar XJ. How to reset maintenance light, reset service light indicator. Can be made manually by use button on car dash board.
How do you reset oil service light Jaguar XJ whit diesel engine. From year: 2008.
Numbers 1 to 4 need to be done within 3 seconds otherwise it will time out.
2010
With Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Press the MENU button until vehicle information menu is displayed then scroll through the menu with the down arrow until Remaining Oil Life is selected then press SET/CLR (check button) to select.
Use up or down arrow to select YES to reset.
Confirm reset by pressing SET/CLR button.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Without Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the Change Engine Oil Soon message goes off the system is reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2005-2009
Turn the ignition to run (one position before starting engine).
Use the fuel button on the Driver Information Center to reach the ENGINE OIL LIFE screen.
Press and hold the select button on the DIC for 5 seconds while ENGINE OIL LIFE is displayed.
OIL LIFE RESET will appear on the DIC display for 10 seconds to let you know the system is reset. If the change oil light comes back on when you start your vehicle, the engine oil life system has not reset, repeat the procedure.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2008
Turn the ignition to run (one position before starting engine).
Maintenance and tire pressure information will be displayed when the “MAINT” button is pushed on the centre console.
To display the setting of the maintenance interval, select the “Engine Oil” key using the joystick and push the “ENTER” button.
To reset the maintenance interval, select the “Reset” key using the joystick and push the “ENTER” button.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2009-2010
Turn the ignition to run (push START/STOP button once).
Switches for the trip computer are located on the right side of the combination meter panel. When the ignition switch is pushed to the ON position press the (square) button to bring up “Setting” and and press (circle) button to select.
Use the (circle) button to scroll to MAINTENANCE and use the (square) button to select.
Select ENGINE OIL to set or reset the distance for changing the oil.
Repeat step 2 to set or reset the distance for the OIL FILTER.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2009-2010
Push the ignition switch to the ON position (do not start the engine). Use the ENTER switch and toggle the vehicle information display to show the SETTING screen. Use the NEXT switch to select
Use the NEXT switch to select MAINTENANCE, then confirm with ENTER switch to change to the oil maintenance menu (follow the insructions).
i) SETTING > MAINTENANCE > OIL > ENGINE OIL to set or reset the mileage for the engine oil change.
ii) SETTING > MAINTENANCE > FILTER > to set or reset the mileage for the engine oil filter.
Turn the ignition off and then start the engine to verify the indicator has been reset.